Model No: OPA2170AIDGKR

Texas Instruments OPA2170AIDGKR

Manufacturer: Texas Instruments
SEMICON NO.: OPA2170AIDGKR
Package: 8-VSSOP
Stock: In stock
Description: Operational Amplifier Dual 36V 1.2MHz
Quantity :
Contact Now
 
 Mfr       Texas Instruments 
 Device Type      Operational Amplifier
 Number of Channels     2 (Dual)
 Gain Bandwidth Product (GBP)   1.2 MHz
 Slew Rate (SR)   0.4 V/µs
 Architecture     CMOS, Voltage-Feedback
 Output Type      Rail-to-Rail Output
 Input Offset Voltage (Max) 250 µV
 Input Offset Voltage Drift (Typ / Max)     ±0.3 µV/°C / ±2 µV/°C
 Input Bias Current (Max)      15 pA
 Common-Mode Rejection Ratio (CMRR)     120 dB (Typical)
 Supply Voltage   Single: 2.7 V to 36 V,Dual: ±1.35 V to ±18 V
 Quiescent Current (per Amplifier)   110 µA (Typical)
 Operating Temperature    –40°C to +125°C
 Package 8-VSSOP
 Mounting Type
 Surface Mount
 Compliance    
 RoHS Compliant
 
OPA2170AIDGKR is a dual-channel low-power precision operational amplifier from Texas Instruments, supplied in an 8-VSSOP (DGK) surface-mount large tape-and-reel package. Built on advanced CMOS process technology, it operates across a wide 2.7 V to 36 V single supply range or symmetric dual supplies from ±1.35 V to ±18 V, delivers a 1.2 MHz gain-bandwidth product with only 110 µA typical quiescent current per channel, and features rail-to-rail output swing with input common-mode range extending 100 mV below the negative supply rail. Equipped with EMI-hardened input filters, 19 nV/√Hz low voltage noise, 1.8 mV maximum input offset voltage and 0.3 µV/°C typical offset drift, this industrial-grade op amp is unity-gain stable, supports up to 300 pF capacitive loads and operates reliably across a -40°C to +125°C ambient temperature range, making it an excellent choice for wide-voltage industrial sensor signal conditioning, 4-20 mA transmitters and battery-powered precision measurement systems.
This wide-voltage low-power dual op amp covers these primary application scenarios: signal conditioning and gain stages for industrial 4-20 mA loop-powered pressure, temperature and flow sensor transmitters; precision current sensing and voltage monitoring circuits for power supplies, battery management systems and industrial motor drives; active low-pass and band-pass filters for audio, biometric and industrial measurement signal paths; high-impedance sensor interfaces including photodiode transimpedance amplifiers and electrochemical sensor front ends; signal buffering and level shifting for 12 V to 24 V industrial PLC and distributed control I/O modules; battery-powered portable test instruments, handheld meters and field calibration devices; and auxiliary amplification and biasing circuits for automotive auxiliary electronics and industrial power supply control loops.
FAQ
Q: Can OPA2170AIDGKR accept input signals below the negative supply pin?
A: Yes, its input common-mode range extends 100 mV below the negative supply rail, and overdrive beyond the rails does not cause phase reversal; however, ensure total supply voltage stays within the 2.7 V to 36 V rating, and add proper supply decoupling capacitors close to the device pins for best noise and stability performance.
Alternative analog IC models 
● OPA170AIDBVR: Single-channel version of the same 36 V low-power op amp in SOT-23 package, ideal for space-constrained single-channel sensor designs requiring matched electrical performance.
● OPA4170AIPWR: Quad-channel 36 V low-power precision op amp in TSSOP-14 package, for multi-channel sensor arrays and data acquisition systems requiring uniform amplifier characteristics across all channels.
● MCP6022-I/SN: Microchip dual-channel rail-to-rail op amp with similar low-power specifications, serving as a cross-brand cost-optimized alternative for general-purpose industrial signal conditioning applications.