Model No: IRLU3410PBF

Infineon Technologies IRLU3410PBF

Manufacturer: Infineon Technologies
SEMICON NO.: IRLU3410PBF
Package: TO-251AA
Stock: In stock
Description: HEXFET FET MOSFET 100V 17A 79W
Quantity :
Contact Now
 
 Mfr       Infineon Technologies    
 Device Type      N-Channel Enhancement Mode Power MOSFET
 Product Series     HEXFET® 
 Drain-Source Voltage (Max)     100 V
 Continuous Drain Current (Max)      17 A
 Pulsed Drain Current (Max)     60 A
 Power Dissipation (Max)    79 W 
 Gate-Source Voltage      ±16 V
 Drain-Source On-Resistance (Max)      105 mΩ
 Gate Threshold Voltage      2 V(Max) , 1.8 V (Min)
 Drive Voltage Range   4 V to 10 V 
 Total Gate Charge (Max) 34 nC
 Input Capacitance (Max)      800 pF
 Operating Temperature    –55°C to +175°C
 Package TO-251AA
 Mounting Type
 Through Hole
 Compliance    
 RoHS Compliant
 
IRLU3410PBF is a logic-level N-channel enhancement-mode HEXFET power MOSFET from Infineon Technologies (formerly International Rectifier), supplied in a through-hole IPAK (TO-251AA) package with 75 units per tube for manual and semi-automated through-hole assembly. Rated for 100 V drain-source breakdown voltage with up to 17 A continuous drain current at 25°C case temperature, it delivers a maximum on-state resistance of 105 mΩ at 10 V gate drive and 125 mΩ at 5 V, features only 34 nC total gate charge at 5 V, and supports 2 V maximum gate threshold voltage for direct logic-level drive. With 79 W power dissipation rating at case temperature, fast-recovery body diode and fully characterized avalanche ruggedness, this device operates reliably across a -55°C to +175°C junction temperature range, making it a versatile solution for medium-power DC-DC conversion, motor control and load switching in industrial, consumer and automotive auxiliary electronic systems.
This logic-level power MOSFET covers these primary application scenarios: synchronous and non-synchronous buck, boost and flyback DC-DC converters for industrial and consumer power supplies; low-voltage motor drive and PWM control for brushless DC fans, pumps and small actuator systems; high-side and low-side load switching for 12 V / 24 V industrial automation modules and battery management systems; solenoid and relay driver circuits for automotive body electronics and industrial control panels; battery pack protection and charge/discharge switches for multi-cell lithium battery systems; auxiliary power switches for telecom distributed power architectures and server standby rails; and general-purpose medium-power switching for consumer appliances, power tools and LED driver circuits.
FAQ
Q: Can IRLU3410PBF be driven directly by a 3.3 V microcontroller output?
A: Yes, its 2 V maximum gate threshold enables turn-on at logic-level voltages, but verify actual on-resistance at the target Vgs and add a small series gate resistor to suppress ringing and protect the MCU pin from inrush current.
Alternative power transistor models
● IRLU2905PBF: Same IPAK through-hole package with 55 V rating and higher 32 A current capacity, optimized for lower-voltage higher-current load switching and motor drive applications.
● FDD8424-F085: ON Semiconductor 100 V N-channel logic-level MOSFET in D-Pak package, serving as a cross-brand second-source alternative for volume production supply chain risk mitigation.
● IRF540NPBF: Classic TO-220 package 100 V N-channel MOSFET with higher current rating, suitable for through-hole designs requiring increased power handling and easier heat sink mounting.