Model No: FQP7N60

onsemi FQP7N60

Manufacturer: onsemi
SEMICON NO.: FQP7N60
Package: TO-220-3 (TO-220AB)
Stock: In stock
Description: Power MOSFET 600V 7.4A 142W
Quantity :
Contact Now
 
 Mfr       onsemi 
 Device Type      N-Channel Enhancement Mode Power MOSFET
 Drain-Source Voltage (Max)     600 V
 Continuous Drain Current      7.4 A
 Pulsed Drain Current (Max)   29.6 A
 Power Dissipation      142 W
 Gate-Source Voltage (Max)    ±30 V
 Drain-Source On-Resistance   1.0 Ω (Max), 0.8 Ω (Typ)
 Gate Threshold Voltage 3.0 V (Min) / 5.0 V (Max) 
 Forward Transconductance       6.4 S (Min)
 Zero Gate Voltage Drain Current     10 µA (Max) 
 Total Gate Charge   29 nC (Typ) / 38 nC (Max)
 Input Capacitance     1100 pF (Typ) / 1430 pF (Max) 
 Output Capacitance      135 pF (Typ) / 175 pF (Max) 
 Operating Temperature    –55°C to +150°C
 Package TO-220-3 (TO-220AB)
 Mounting Type
 Through Hole
 Compliance    
 RoHS Compliant
 
QP7N60 is an N-channel enhancement-mode power MOSFET from ON Semiconductor (formerly Fairchild Semiconductor), built on proprietary QFET planar stripe DMOS technology and supplied in a standard through-hole TO-220-3 package in tube packing. Rated for 600 V drain-source breakdown voltage with 7.4 A continuous drain current at 25°C case temperature, it features a maximum on-state resistance of 1.0 Ω at 10 V gate drive, 29 nC typical gate charge and 580 mJ single-pulse avalanche energy capability. With a 142 W power dissipation rating at 25°C case temperature and a -55°C to +150°C junction operating range, this high-voltage MOSFET delivers balanced conduction and switching performance, making it widely used for offline switch-mode power supplies, active power factor correction circuits and general-purpose high-voltage switching designs in industrial, consumer and lighting electronic systems.
 
● Fast switching speed with low reverse recovery charge and 4.5 V/ns dv/dt capability supports efficient operation at switching frequencies from tens of kHz to several hundred kHz, enabling smaller magnetic components and compact power supply form factors.
● Standard TO-220-3 through-hole package provides excellent thermal dissipation with direct heat sink mounting, compatible with standard through-hole assembly processes for easy prototyping and low- to mid-volume production.
● Wide -55°C to +150°C junction temperature range with 1.14 W/°C linear derating allows reliable operation in high-ambient industrial enclosures and enclosed power supply chassis without premature thermal shutdown.
● Proprietary QFET planar stripe technology delivers uniform current distribution across the die and improved surge ruggedness, with tightly specified parametric distribution for consistent performance across production lots.
● ±30 V gate-source voltage tolerance accommodates a wide range of gate drive circuits, including 10 V to 15 V standard power supply gate drive designs and simplified low-voltage control interfaces from PWM controller ICs.
 
This 600 V N-channel MOSFET serves these primary application scenarios: offline flyback and forward switch-mode power supplies for consumer adapters, set-top boxes and industrial auxiliary power modules; active power factor correction (PFC) stages for AC-DC converters and high-power LED drivers; electronic lamp ballasts for fluorescent and high-intensity discharge lighting systems; DC-AC inverter circuits for small UPS units, solar micro-inverters and low-power motor drive pre-stages; high-voltage switching for industrial battery chargers and telecom distributed power systems; general-purpose high-voltage load switching and relay driver circuits; and auxiliary power switches for offline power management and standby power supply circuits.
Alternative power FET models
● FQPF7N60: Identical 600 V 7.4 A MOSFET in insulated TO-220F package with molded isolation tab, for designs requiring electrical isolation between the mounting tab and grounded heat sinks.
● FQP10N60C: Higher-current 10 A 600 V MOSFET in the same TO-220 package with lower on-resistance, for upgraded higher-power power supply and PFC stage designs requiring increased current capacity.
● SPA07N60C3: Infineon CoolMOS 600 V 7 A N-channel MOSFET with significantly lower Rds(on), serving as a higher-efficiency cross-brand alternative for energy-conscious power supply and lighting applications.
● 7N60-TL-W: Taiwan Semiconductor cross-brand 600 V 7 A MOSFET in TO-220 package as a cost-optimized second-source option for volume production supply chain risk mitigation.