Model No: ATSAME70Q21A-CN

Microchip Technology ATSAME70Q21A-CN

Manufacturer: Microchip Technology
SEMICON NO.: ATSAME70Q21A-CN
Package: 144-LFBGA
Stock: In stock
Description: IC Microcontroller 32bit 2MB Flash 300MHz
Quantity :
Contact Now
 
 Mfr       Microchip Technology 
 Device Type      32-bit ARM Cortex-M7 Microcontroller
 Core Processor   ARM® Cortex®-M7
 Core Size   32-bit Single-Core
 Maximum CPU Speed     300 MHz
 Program Memory (Flash)     2 MB (2,048 KB)
 RAM (SRAM)     384 KB multi-port SRAM
 Analog Peripherals    Dual 12-bit ADCs, 2 Msps, up to 24 channels; 2-channel 12-bit DAC, 2 Msps
 Analog Comparators     1 comparator
 Temperature Sensor     Internal temperature sensor
 General-Purpose I/O Pins     114 I/O lines
 PWM Channels     20 PWM channels
 Supply Voltage   1.62 V to 3.6 V
 Core Voltage (Nominal)     1.2 V
 Operating Temperature    –40°C to +105°C
 Package 144-LFBGA
 Mounting Type
 Surface Mount
 Compliance    
 RoHS Compliant
 
ATSAME70Q21A-CN is a high-performance 32-bit general-purpose microcontroller from Microchip Technology, built on the ARM Cortex-M7 RISC core with double-precision hardware FPU and supplied in a 144-ball LFBGA package measuring 10 × 10 mm in tray packaging. Running at up to 300 MHz with 16 KB instruction cache and 16 KB data cache with ECC protection, it integrates 2 MB of on-chip Flash memory, 384 KB of multi-port SRAM configurable as tightly coupled memory for zero-wait-state execution, and a rich peripheral set including 10/100 Ethernet MAC with AVB support, dual CAN-FD controllers, high-speed USB Host/Device with on-chip PHY, image sensor interface and dual 2 Msps 12-bit ADCs. Operating from a 1.62 V to 3.6 V supply across an extended industrial temperature range of -40°C to +105°C, this MCU combines advanced DSP capability, hardware security acceleration and rich connectivity to serve as a high-integration processing core for industrial automation, connected edge nodes and high-end embedded control systems.
 
This Cortex-M7 MCU covers these primary application scenarios: high-performance industrial controllers, PLC modules and factory automation edge nodes requiring multi-protocol communication and real-time control; industrial Ethernet gateways, CAN-to-ethernet converters and fieldbus protocol converters for Industry 4.0 connected systems; high-resolution human-machine interface terminals, graphic display controllers and industrial touch panel controllers with image sensor input; test and measurement instrumentation, data acquisition systems and high-speed data loggers requiring precision analog and fast processing; smart building automation controllers, HVAC master control units and connected sensor aggregators; and edge computing IoT gateways with local data processing, security acceleration and multi-network connectivity.
FAQ
Q: Does ATSAME70Q21A-CN support hardware accelerated floating-point math?
A: Yes, it integrates a double-precision hardware FPU alongside DSP instructions to accelerate floating-point control loops and signal processing; note that the LFBGA package requires proper BGA soldering and underfill processes for high-reliability industrial deployments.
Alternative industrial MCU models
1. ATSAMS70Q21A-CN: Same Cortex-M7 core and memory in 144-LFBGA package without Ethernet and CAN-FD, optimized for cost-sensitive industrial control designs that do not require advanced networking features.
2. STM32F746IGK6: STMicroelectronics Cortex-M7 216 MHz MCU in 176-pin BGA package with similar peripheral set, serving as a cross-brand alternative for high-performance industrial and HMI applications.
3. ATSAME51N20A-CN: Lower-power Cortex-M4F MCU in smaller package, suitable for cost-optimized edge sensor nodes and mid-tier control applications with less processing demand.