Model No: NCP308MTADJTBG
onsemi NCP308MTADJTBG
Manufacturer: onsemi
SEMICON NO.: NCP308MTADJTBG
Package: 6-WDFN
Stock: In stock
Description: Supervisory Circuit 0.405V 300ms 0.31%
SEMICON NO.: NCP308MTADJTBG
Package: 6-WDFN
Stock: In stock
Description: Supervisory Circuit 0.405V 300ms 0.31%
Quantity :
| Mfr | onsemi |
| Device Type | Ultra-Low Quiescent Current, Programmable Delay Time Supervisory Circuit |
| Product Family | NCP308 (Voltage Supervisor / Reset IC) |
| Number of Voltages Monitored | 1 |
| Reset Output Type | Open-Drain, Active Low (/RESET) |
| Threshold Voltage | 0.405 V (Min) |
| Reset Timeout / Delay | 300 ms (fixed) / Adjustable 1.25 ms to 10 s |
| Threshold Voltage Accuracy | 0.31% (typical) |
| Supply Voltage | 1.6 V to 5.5 V |
| Quiescent Current | 1.6 µA (typical) |
| Maximum Output Current | 5 mA |
| DC Supply Current (Max) | 6 µA |
| Operating Temperature | –40°C to +125°C |
| Package | 6-WDFN |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
NCP308MTADJTBG is an ultra-low-quiescent-current adjustable voltage supervisor from ON Semiconductor, supplied in a 6-WDFN surface-mount tape-and-reel package. Designed to monitor system supply rails and generate reliable reset signals, it operates from a 1.6 V to 5.5 V supply voltage, features a 0.405 V internal reference threshold for adjustable sensing via an external resistor divider, and delivers 0.31% typical threshold accuracy across full operating temperature range. Equipped with an active-low open-drain RESET output, manual reset input and programmable reset delay ranging from 1.25 ms to 10 seconds set by a single external capacitor, this supervisor IC ensures correct system initialization and fault recovery for battery-powered portable devices, industrial controllers and high-density digital systems across a -40°C to +125°C junction temperature range.
This adjustable voltage supervisor covers these primary application scenarios: power-on reset and brown-out protection for microcontroller, FPGA, DSP and ASIC based embedded systems; multi-rail voltage monitoring and sequencing for industrial control modules, factory automation equipment and data acquisition units; battery-powered portable instruments, handheld terminals and wearable electronic devices requiring ultra-low standby current; supply voltage supervision for consumer set-top boxes, home appliances and smart metering systems; power supply fault detection and system recovery for automotive infotainment and body electronic auxiliary modules; voltage monitoring for memory modules, storage devices and communication interface circuits; and general-purpose undervoltage protection for distributed 1.8 V to 5 V POL power systems.
FAQ
Q: Can NCP308MTADJTBG monitor a voltage higher than its own supply rail?
A: Yes, its SENSE input is independent of the VDD supply and can handle voltages up to 8.0 V set by the external divider, while VDD itself can run from a lower rail; always add a pull-up resistor on the open-drain RESET pin matched to the target logic domain, and select the external capacitor value to match the required reset delay time.
Q: Can NCP308MTADJTBG monitor a voltage higher than its own supply rail?
A: Yes, its SENSE input is independent of the VDD supply and can handle voltages up to 8.0 V set by the external divider, while VDD itself can run from a lower rail; always add a pull-up resistor on the open-drain RESET pin matched to the target logic domain, and select the external capacitor value to match the required reset delay time.
Alternative reset IC models
● NCP308MT330TBG: Fixed 3.3 V threshold supervisor in the same WDFN-6 package, eliminating external divider resistors for standard 3.3 V system rails to reduce BOM count and simplify layout.
● NCV308SNADJT1G: AEC-Q100 qualified automotive-grade adjustable supervisor in TSOP-6 package, designed for under-hood and body electronic voltage monitoring applications requiring automotive reliability certification.
● TPS3839K33DBVR: Texas Instruments 3.3 V fixed voltage supervisor with similar ultra-low IQ, serving as a cross-brand drop-in alternative for general-purpose microcontroller power-on reset designs.
● NCP308MT330TBG: Fixed 3.3 V threshold supervisor in the same WDFN-6 package, eliminating external divider resistors for standard 3.3 V system rails to reduce BOM count and simplify layout.
● NCV308SNADJT1G: AEC-Q100 qualified automotive-grade adjustable supervisor in TSOP-6 package, designed for under-hood and body electronic voltage monitoring applications requiring automotive reliability certification.
● TPS3839K33DBVR: Texas Instruments 3.3 V fixed voltage supervisor with similar ultra-low IQ, serving as a cross-brand drop-in alternative for general-purpose microcontroller power-on reset designs.