Model No: ST25R95-VMD5T

STMicroelectronics ST25R95-VMD5T

Manufacturer: STMicroelectronics
SEMICON NO.: ST25R95-VMD5T
Package: 32-VFQFN
Stock: In stock
Description: RFID Reader Writer IC 13.56MHz FeliCa NFC SPI
Quantity :
Contact Now
 
 Mfr       STMicroelectronics 
 Product Family     ST25R (NFC/RFID Reader ICs)
 Device Type      Integrated NFC/HF RFID Reader/Writer Transceiver IC
 Operating Frequency   13.56 MHz
 Supported Standards (Reader Mode)   ISO/IEC 14443 Type A & B, ISO/IEC 15693, ISO 18000-3, FeliCa™, MIFARE® Classic, NFC Forum Type 1/2/3/4/5
 Operating Modes   Reader/Writer, Card Emulation
 Data Transfer Rate (Max)     424 kbps 
 Host Interface     SPI Slave (up to 2 Mbps)
 Command/Reception Buffer (FIFO)   Up to 528 bytes (Reader/Writer); 256 bytes (Card Emulation)
 Supply Voltage   2.7 V to 5.5 V
 Power Dissipation      1 W
 Output Power      0.23 W
 Operating Temperature    –25°C to +85°C
 Package 32-VFQFN
 Mounting Type
 Surface Mount
 Compliance    
 RoHS Compliant
 
ST25R95-VMD5T 13.56 MHz NFC/HF RFID Reader Transceiver IC with SPI Host Interface 
The ST25R95-VMD5T is a near-field communication (NFC) transceiver IC from STMicroelectronics, part of the ST25 family of NFC/RFID tag and reader products. It manages frame coding and decoding in reader and card emulation modes for NFC, proximity and vicinity standards. An embedded analog front end (AFE) provides the 13.56 MHz air interface, while a dedicated internal frame controller, optimized power management and tag and field detection modes simplify reader design. The host connects through an SPI slave interface up to 2 Mbps with a 528-byte command/reception FIFO. 
Highlights and Features
● ST25 family NFC/HF RFID reader transceiver supporting Reader/Writer and Card emulation (ISO/IEC 14443-3 Type A) modes.
● 13.56 MHz RF covering NFC-A/ISO14443A, NFC-B/ISO14443B, NFC-F/FeliCa and NFC-V/ISO15693 reader modes.
● MIFARE Classic compatible; detects, reads and writes NFC Forum Type 1, 2, 3, 4 and 5 tags.
● Handles ISO/IEC 14443-3 Type A and B tags, ISO/IEC 15693 tags and ISO/IEC 18000-3 mode 1 tags.
● Embedded analog front end (AFE) for the 13.56 MHz air interface, with transmission and reception modes.
● Dedicated internal frame controller encodes and decodes frames to offload the host microcontroller.
● SPI slave host interface up to 2 Mbps with a 528-byte command/reception FIFO.
● Tag detection and field detection modes support low-power card presence sensing.
● About 230 mW nominal output power drives the antenna directly.
Applications
● Consumer electronics and home appliances with tap-to-pair or tap-to-act features.
● Gaming consoles, accessories and interactive toys.
● Healthcare and medical devices needing contactless identification.
● Industrial equipment, access control and asset tracking.
● NFC-enabled Wi-Fi and Bluetooth pairing, plus data exchange with NFC/RFID tags.
● Point-of-sale, payment and loyalty terminals using ISO14443 A/B and MIFARE cards.
Frequently Asked Questions
‌Q: Which RF standards are supported?‌ A: NFC-A/B/F/V reader modes (ISO14443A/B, FeliCa, ISO15693), MIFARE Classic and NFC Forum Type 1-5 tags; card emulation is ISO/IEC 14443-3 Type A.
‌Q: How does it connect to the host?‌ A: Through an SPI slave interface up to 2 Mbps with a 528-byte command/reception FIFO.
‌Q: What supply and output power are required?‌ A: A 2.7 V to 5.5 V supply with 230 mW nominal output power to drive the antenna.
Alternative and Equivalent NFC transceiver Models
‌1. CR95HF-VMD5T‌ - ST's predecessor 13.56 MHz NFC transceiver in the same 32-lead VFQFPN footprint, a pin-compatible drop-in.
2‌. ST25R3911B‌ - a higher-performance ST NFC initiator with 1 W output, automatic antenna tuning and dynamic power output.
‌3. ST25R3920B‌ - the AEC-Q100 automotive-qualified NFC reader for in-vehicle and Car Connectivity Consortium use cases.
‌4. ST25R100‌ - a newer, compact ST NFC/HF reader IC for cost-sensitive, smaller-footprint designs.
5‌. MFRC52202HN1‌ (NXP) - a widely used 13.56 MHz ISO14443A reader IC with SPI/UART/I2C, a common cross-vendor choice.