Model No: MIC5225-3.3YM5-TR

Microchip Technology MIC5225-3.3YM5-TR

Manufacturer: Microchip Technology
SEMICON NO.: MIC5225-3.3YM5-TR
Package: SOT-23-5
Stock: In stock
Description: Regulator LDO 3.3V 18V 150mA
Quantity :
Contact Now
 
 Mfr       Microchip Technology 
 Device Type      Fixed Positive LDO Linear Regulator
 Output Type     Fixed
 Output Voltage (Nominal)     3.3 V
 Output Voltage Tolerance     ±2.0%
 Output Voltage Range (Min/Max)     3.234 V / 3.366 V
 Maximum Output Current     150 mA
 Input Voltage   2.3 V to 16 V
 Absolute Max Input Voltage     18 V
 Dropout Voltage Typ: 310 mV @ 150 mA, Max: 450 mV @ 150 mA
 Quiescent/Ground Current   29 µA (typical)
 Shutdown Current     Zero (typ)
 Load Regulation (Max)     0.033 V
 Line Regulation (Max, derived)   0.132 V
 Operating Temperature    –40°C to +125°C
 Package SOT-23-5
 Mounting Type
 Surface Mount
 Compliance    
 RoHS Compliant
 
MIC5225-3.3YM5-TR 150 mA LDO Regulator (SOT-23-5)
The MIC5225-3.3YM5-TR is a 150 mA, ultra-low quiescent current uCap low-dropout linear regulator from Microchip Technology, originally designed by Micrel. It delivers a fixed 3.3 V output from an input as high as 16 V, and its wide 2.3 V to 16 V range covers USB rails and single-, dual- or triple-cell Li-ion battery systems. Ground current is only 29 uA and dropout just 310 mV typical (450 mV maximum) at the full 150 mA load, so it keeps high efficiency in battery-powered designs. Output accuracy stays within +/-2.0% over temperature, while the uCap architecture remains stable with ceramic or tantalum output capacitors using as little as 2.2 uF. Enable input, current limit, thermal shutdown and reverse-battery protection are integrated, in the IttyBitty SOT-23-5 package rated -40 C to +125 C junction temperature.
Highlights and Features
● Wide 2.3 V to 16 V input range covering USB rails and single-, dual- or triple-cell Li-ion battery supplies.
● Guaranteed 150 mA output with +/-2.0% accuracy across the full temperature range.
● Ultra-low 29 uA ground current for high efficiency and long battery life.
● Low dropout of just 310 mV typical and 450 mV maximum at 150 mA.
● uCap design stays stable with ceramic or tantalum output capacitors using only 2.2 uF.
● Excellent line and load regulation - better than 0.01%/V and 0.1% respectively.
● Enable input for external on/off control and sequencing.
● Reverse-battery and reverse-leakage protection plus zero off-mode current.
Applications
● Mobile phones and other single-cell Li-ion portable devices.
● Backup power supplies in notebook and portable computers.
● Battery-powered equipment and portable consumer electronics.
● High-efficiency linear power supplies and post-regulation stages.
● USB-powered peripherals and general-purpose point-of-load rails.
● Automotive and industrial electronics needing a compact low-dropout regulator.
Frequently Asked Questions

‌Q: What output voltage is provided?‌ A: A fixed 3.3 V output; the MIC5225 family also offers 1.5 V, 1.8 V, 2.5 V, 2.7 V, 3.0 V and 5.0 V versions.
‌Q: What output capacitor is required?‌ A: Any ceramic or tantalum capacitor of 2.2 uF or larger; the uCap design stays stable without special ESR requirements.
‌Q: How much input voltage can it tolerate?‌ A: Up to 16 V maximum input, with a 2.3 V minimum for regulated operation.
Alternative and Equivalent LDO regulator Models
‌● MIC5225-5.0YM5-TR‌ - the 5.0 V fixed-output family member for designs needing a higher regulated rail.
● ‌MIC5225-1.8YM5-TR‌ - the 1.8 V output variant sharing the same footprint and feature set.
‌● MIC5235-3.3YM5-TR‌ - a higher-current, low-dropout sibling in the same SOT-23-5 package for loads above 150 mA.
‌● TPS7B6933DBVR‌ (Texas Instruments) - a 3.3 V, 150 mA low-Iq LDO in SOT-23-5 used as a cross-vendor equivalent.
‌● AP2204K-3.3TRG1‌ (Diodes Inc.) - a low-dropout 3.3 V LDO in SOT-23-5 serving as a pin-compatible second source.