Model No: UCC21225ANPLR
Texas Instruments UCC21225ANPLR
Manufacturer: Texas Instruments
SEMICON NO.: UCC21225ANPLR
Package: 13-VLGA
Stock: In stock
Description: IC Gate driver Dual-channel 2500Vrms
SEMICON NO.: UCC21225ANPLR
Package: 13-VLGA
Stock: In stock
Description: IC Gate driver Dual-channel 2500Vrms
Quantity :
| Mfr | Texas Instruments |
| Device Type | Isolated Dual-Channel Gate Driver |
| Number of Channels | 2 |
| Isolation Voltage (VISO) | 2500 Vrms |
| Common Mode Transient Immunity (CMTI) | 100 V/ns (Min) |
| Output High/Low Current | 4 A / 6 A |
| Output Supply Voltage | 3 V to 18 V |
| Propagation Delay | 30 ns (Max) |
| Pulse Width Distortion (PWD) | 6 ns (Max) |
| Rise Time | 6 ns (Typ) |
| Fall Time | 7 ns (Typ) |
| Input Supply Voltage | 3 V to 18 V |
| Operating Temperature | -40°C to +125°C |
| Package | 13-VLGA |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
UCC21225ANPLR isolated gate driver
The UCC21225ANPLR is a 2.5 kVRMS isolated dual-channel gate driver in a compact LGA-13 package. It delivers 4 A source / 6 A sink peak output currents to efficiently drive power switches like SiC, GaN, IGBT, and MOSFET at switching frequencies up to 5 MHz. With a wide 3 V to 18 V input supply (VCCI) and up to 25 V driver-side supply (VDD), it supports flexible interfacing with 3.3 V or 5 V MCUs while providing robust 5 V UVLO protection. The device features best-in-class 19 ns propagation delay and < 6 ns pulse-width distortion, ensuring precise timing control for high-frequency power conversion. It is fully specified over the -40°C to +125°C industrial temperature range and complies with key safety standards including UL 1577 and VDE V 0884-11, making it a high-reliability solution for demanding power electronics.
The UCC21225ANPLR is engineered for high-voltage power conversion systems including industrial motor drives, servo drives, and solar inverters. Its high CMTI and fast switching make it ideal for EV onboard chargers (OBC), DC fast charging modules, and UPS systems. It is also widely used in switch-mode power supplies (SMPS), telecom rectifiers, and welding equipment where reinforced isolation and precise gate control are critical for efficiency and safety.
Securing a reliable supply chain is crucial. Semicone specializes in emergency and shortage IC solutions, providing access to verified stock of Texas Instruments gate drivers and acting as a full-category semiconductor distributor to mitigate production risks for critical power design BOMs.
Alternative SiC GaN drivers
● UCC21520 (TI): A similar 4 A/6 A isolated dual driver but with higher 5.7 kVRMS isolation and wider creepage SOIC package, suitable for applications requiring enhanced safety margins.
● ADuM3223 (Analog Devices): A 4 A isolated dual-channel driver using iCoupler technology, offering comparable speed and CMTI for designers seeking an alternative isolation architecture.
● Si823Hx (Skyworks): A high-side/low-side isolated driver with programmable dead time and 5 kVRMS isolation, ideal for replacing discrete driver+transformer solutions.
● 1EDN7550U (Infineon): A single-channel 5 A EiceDRIVER in a tiny DSO-8 package, optimized for space-constrained GaN and SiC applications where only one channel is needed.
The UCC21225ANPLR is a 2.5 kVRMS isolated dual-channel gate driver in a compact LGA-13 package. It delivers 4 A source / 6 A sink peak output currents to efficiently drive power switches like SiC, GaN, IGBT, and MOSFET at switching frequencies up to 5 MHz. With a wide 3 V to 18 V input supply (VCCI) and up to 25 V driver-side supply (VDD), it supports flexible interfacing with 3.3 V or 5 V MCUs while providing robust 5 V UVLO protection. The device features best-in-class 19 ns propagation delay and < 6 ns pulse-width distortion, ensuring precise timing control for high-frequency power conversion. It is fully specified over the -40°C to +125°C industrial temperature range and complies with key safety standards including UL 1577 and VDE V 0884-11, making it a high-reliability solution for demanding power electronics.
The UCC21225ANPLR is engineered for high-voltage power conversion systems including industrial motor drives, servo drives, and solar inverters. Its high CMTI and fast switching make it ideal for EV onboard chargers (OBC), DC fast charging modules, and UPS systems. It is also widely used in switch-mode power supplies (SMPS), telecom rectifiers, and welding equipment where reinforced isolation and precise gate control are critical for efficiency and safety.
Securing a reliable supply chain is crucial. Semicone specializes in emergency and shortage IC solutions, providing access to verified stock of Texas Instruments gate drivers and acting as a full-category semiconductor distributor to mitigate production risks for critical power design BOMs.
Alternative SiC GaN drivers
● UCC21520 (TI): A similar 4 A/6 A isolated dual driver but with higher 5.7 kVRMS isolation and wider creepage SOIC package, suitable for applications requiring enhanced safety margins.
● ADuM3223 (Analog Devices): A 4 A isolated dual-channel driver using iCoupler technology, offering comparable speed and CMTI for designers seeking an alternative isolation architecture.
● Si823Hx (Skyworks): A high-side/low-side isolated driver with programmable dead time and 5 kVRMS isolation, ideal for replacing discrete driver+transformer solutions.
● 1EDN7550U (Infineon): A single-channel 5 A EiceDRIVER in a tiny DSO-8 package, optimized for space-constrained GaN and SiC applications where only one channel is needed.
