Model No: LMV604MAX/NOPB
Texas Instruments LMV604MAX/NOPB
Manufacturer: Texas Instruments
SEMICON NO.: LMV604MAX/NOPB
Package: 14-SOIC
Stock: In stock
Description: General-Purpose Amplifier 4 Channels
SEMICON NO.: LMV604MAX/NOPB
Package: 14-SOIC
Stock: In stock
Description: General-Purpose Amplifier 4 Channels
Quantity :
| Mfr | Texas Instruments |
| Product Series | LMV |
| Device Type | General-Purpose Operational Amplifier |
| Number of Channels | 4 |
| Gain Bandwidth Product (GBW) | 1 MHz |
| Slew Rate (SR) | 1 V/µs |
| Architecture | CMOS, Voltage-Feedback |
| Input Offset Voltage (Vos) (Max) | 550 µV - 5 mV |
| Input Bias Current (Ib) (Max) | 0.02 pA |
| Output Type | Rail-to-Rail Output |
| Output Current per Channel | 75 mA - 113 mA |
| Supply Voltage Range | 2.7V to 5.5V |
| Operating Temperature | -40°C to 125°C |
| Package | 14-SOIC |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
LMV604MAX/NOPB operational amplifier
LMV604MAX/NOPB is a quad, low-voltage, rail-to-rail input/output operational amplifier from Texas Instruments that integrates four independent op-amp channels in a 14-pin SOIC package, delivering 1.4 MHz bandwidth, 1.0 V/µs slew rate and 20 µA per amplifier supply current while operating from a single 2.7 V to 5.5 V supply. The device features true rail-to-rail input and output swing (within 50 mV of rails), 60 dB CMRR and 65 dB PSRR, making it ideal for battery-powered sensor conditioning, active filters and portable instrumentation where moderate speed, low power and wide dynamic range are required .
Technical Specifications and Performance Advantages
The advanced CMOS architecture achieves 1.4 MHz unity-gain bandwidth with only 20 µA quiescent current per channel—enabling 500 hours of continuous operation from a single 9 V battery—and maintains stability with capacitive loads up to 200 pF without external compensation. Input offset voltage is trimmed to 1.0 mV max with 5 µV/°C drift, ensuring precision DC accuracy over −40 °C to +125 °C industrial temperature. The rail-to-rail input stage accepts signals from 0 V to VCC, eliminating input level shifting in single-supply designs. Output drive capability is ±30 mA with short-circuit protection, and the device recovers from overload in < 5 µs.
Alternativerail-to-rail amplifierModels
● TI TLV9004IPWR: quad op-amp, 1 MHz, 25 µA/ch, 0.4 mV offset, TSSOP-14, higher precision for measurement applications.
● ON Semi NCS2244DTBR2G: quad op-amp, 500 kHz, 15 µA/ch, 1 mV offset, TSSOP-14, improved speed-power product.
● STMicroelectronics TS974IPT: quad op-amp, 900 kHz, 200 µA/ch, 5 mV offset, TSSOP-14, higher drive current for line outputs.
● Microchip MCP6004T-I/ST: quad op-amp, 1 MHz, 100 µA/ch, 4.5 mV offset, TSSOP-14, cost-optimized for consumer electronics.
● Nexperia 74LVC1G3157GW: single analog switch, not op-amp, 1.65–5.5 V, for signal routing when amplification is unnecessary.
LMV604MAX/NOPB is a quad, low-voltage, rail-to-rail input/output operational amplifier from Texas Instruments that integrates four independent op-amp channels in a 14-pin SOIC package, delivering 1.4 MHz bandwidth, 1.0 V/µs slew rate and 20 µA per amplifier supply current while operating from a single 2.7 V to 5.5 V supply. The device features true rail-to-rail input and output swing (within 50 mV of rails), 60 dB CMRR and 65 dB PSRR, making it ideal for battery-powered sensor conditioning, active filters and portable instrumentation where moderate speed, low power and wide dynamic range are required .
Technical Specifications and Performance Advantages
The advanced CMOS architecture achieves 1.4 MHz unity-gain bandwidth with only 20 µA quiescent current per channel—enabling 500 hours of continuous operation from a single 9 V battery—and maintains stability with capacitive loads up to 200 pF without external compensation. Input offset voltage is trimmed to 1.0 mV max with 5 µV/°C drift, ensuring precision DC accuracy over −40 °C to +125 °C industrial temperature. The rail-to-rail input stage accepts signals from 0 V to VCC, eliminating input level shifting in single-supply designs. Output drive capability is ±30 mA with short-circuit protection, and the device recovers from overload in < 5 µs.
Alternativerail-to-rail amplifierModels
● TI TLV9004IPWR: quad op-amp, 1 MHz, 25 µA/ch, 0.4 mV offset, TSSOP-14, higher precision for measurement applications.
● ON Semi NCS2244DTBR2G: quad op-amp, 500 kHz, 15 µA/ch, 1 mV offset, TSSOP-14, improved speed-power product.
● STMicroelectronics TS974IPT: quad op-amp, 900 kHz, 200 µA/ch, 5 mV offset, TSSOP-14, higher drive current for line outputs.
● Microchip MCP6004T-I/ST: quad op-amp, 1 MHz, 100 µA/ch, 4.5 mV offset, TSSOP-14, cost-optimized for consumer electronics.
● Nexperia 74LVC1G3157GW: single analog switch, not op-amp, 1.65–5.5 V, for signal routing when amplification is unnecessary.
