Model No: NCS20072DR2G
onsemi NCS20072DR2G
Manufacturer: onsemi
SEMICON NO.: NCS20072DR2G
Package: 8-SOIC
Stock: In stock
Description: GP Amplifier 2 Circuits Rail-to-Rail
SEMICON NO.: NCS20072DR2G
Package: 8-SOIC
Stock: In stock
Description: GP Amplifier 2 Circuits Rail-to-Rail
Quantity :
| Mfr | onsemi |
| Device Type | Dual CMOS Operational Amplifier (Op Amp) |
| Number of Circuits / Channels | 2 (Dual) |
| Output Type | Rail-to-Rail Output (RRO) |
| Gain Bandwidth Product (GBP) | 3.2 MHz (typical) |
| Slew Rate (SR) | 2.4 V/µs (typical) |
| Voltage Gain (AV) | 120 dB (typical) |
| Input Offset Voltage (VOS) | 1.3 mV (typical) / 4 mV (max) |
| Input Bias Current (IB) | 5 pA (typical) |
| Input Voltage Noise Density (eN) | 30 nV/√Hz @ 1 kHz |
| Common Mode Rejection Ratio (CMRR) | 115 dB (typical) |
| Supply Voltage - Single (VS) | 2.7 V to 36 V |
| Supply Voltage - Dual (±VS) | ±1.35 V to ±18 V |
| Operating Temperature | -40°C to +125°C |
| Package | 8-SOIC |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
NCS20072DR2G rail-to-rail output operational amplifier
TheNCS20072DR2G is a dual-channel, rail-to-rail output operational amplifier from ON Semiconductor (onsemi) that delivers an optimal balance of bandwidth, slew rate, and power efficiency for general-purpose signal conditioning applications. Featuring a wide supply voltage range from 2.7V to 36V (±1.35V to ±18V dual supply), this CMOS-based device achieves 3MHz unity-gain bandwidth with 2.8V/μs slew rate while consuming only 405μA quiescent current per channel. Housed in a standard 8-pin SOIC package with surface-mount gull-wing leads, it operates reliably across the extended temperature range of -40°C to +125°C with AEC-Q100 automotive qualification available (NCV prefix), making it ideal for both industrial automation and automotive electronics requiring robust performance.
NCS20072DR2G GP Amplifier Applications
• Current Sensing: Precision amplification of shunt resistor voltages in motor control, power management, and battery monitoring systems
• Signal Conditioning: Sensor interface and analog front-end processing for industrial automation and process control equipment
• Automotive Electronics: AEC-Q100 qualified variants support body control modules, sensor interfaces, and infotainment systems in vehicle environments
• Portable Instrumentation: Low power consumption and wide supply range ideal for handheld test equipment and battery-powered data loggers
• Power Supply Monitoring: High PSRR and wide voltage range enable accurate voltage feedback and regulation in switching converters
• Notebook Computers: Signal processing for thermal management, battery charging, and peripheral interface circuits
• General Purpose Filtering: Active filter implementation for anti-aliasing, noise reduction, and signal shaping in mixed-signal systems
Alternative Compatible Amplifiers
1. NCS20071SN2T1G: Single-channel variant in compact SOT23-5 package sharing identical electrical specifications for space-constrained single-amplifier designs.
2. NCS20074DR2G: Quad-channel version with four independent amplifiers in 14-pin SOIC package for multi-channel signal processing applications requiring reduced per-channel cost.
3. NCV20072DR2G: AEC-Q100 Grade 1 automotive-qualified variant (-40°C to +125°C) with enhanced quality and traceability for safety-critical vehicle systems.
4. LM358DR: Texas Instruments' industry-standard dual op-amp offering comparable dual-channel configuration with higher 1V/μs slew rate for cost-sensitive general-purpose applications.
5. MCP6022-I/SN: Microchip's 10MHz rail-to-rail dual op-amp providing higher bandwidth alternative with similar pinout for performance-upgraded designs.
6. SGM8262-2YS8G/TR: SGMicro's precision dual op-amp with low offset voltage and rail-to-rail output serving as pin-compatible alternative with enhanced DC specifications.
TheNCS20072DR2G is a dual-channel, rail-to-rail output operational amplifier from ON Semiconductor (onsemi) that delivers an optimal balance of bandwidth, slew rate, and power efficiency for general-purpose signal conditioning applications. Featuring a wide supply voltage range from 2.7V to 36V (±1.35V to ±18V dual supply), this CMOS-based device achieves 3MHz unity-gain bandwidth with 2.8V/μs slew rate while consuming only 405μA quiescent current per channel. Housed in a standard 8-pin SOIC package with surface-mount gull-wing leads, it operates reliably across the extended temperature range of -40°C to +125°C with AEC-Q100 automotive qualification available (NCV prefix), making it ideal for both industrial automation and automotive electronics requiring robust performance.
NCS20072DR2G GP Amplifier Applications
• Current Sensing: Precision amplification of shunt resistor voltages in motor control, power management, and battery monitoring systems
• Signal Conditioning: Sensor interface and analog front-end processing for industrial automation and process control equipment
• Automotive Electronics: AEC-Q100 qualified variants support body control modules, sensor interfaces, and infotainment systems in vehicle environments
• Portable Instrumentation: Low power consumption and wide supply range ideal for handheld test equipment and battery-powered data loggers
• Power Supply Monitoring: High PSRR and wide voltage range enable accurate voltage feedback and regulation in switching converters
• Notebook Computers: Signal processing for thermal management, battery charging, and peripheral interface circuits
• General Purpose Filtering: Active filter implementation for anti-aliasing, noise reduction, and signal shaping in mixed-signal systems
Alternative Compatible Amplifiers
1. NCS20071SN2T1G: Single-channel variant in compact SOT23-5 package sharing identical electrical specifications for space-constrained single-amplifier designs.
2. NCS20074DR2G: Quad-channel version with four independent amplifiers in 14-pin SOIC package for multi-channel signal processing applications requiring reduced per-channel cost.
3. NCV20072DR2G: AEC-Q100 Grade 1 automotive-qualified variant (-40°C to +125°C) with enhanced quality and traceability for safety-critical vehicle systems.
4. LM358DR: Texas Instruments' industry-standard dual op-amp offering comparable dual-channel configuration with higher 1V/μs slew rate for cost-sensitive general-purpose applications.
5. MCP6022-I/SN: Microchip's 10MHz rail-to-rail dual op-amp providing higher bandwidth alternative with similar pinout for performance-upgraded designs.
6. SGM8262-2YS8G/TR: SGMicro's precision dual op-amp with low offset voltage and rail-to-rail output serving as pin-compatible alternative with enhanced DC specifications.
