Model No: DRV8410RTER

Texas Instruments DRV8410RTER

Manufacturer: Texas Instruments
SEMICON NO.: DRV8410RTER
Package: 16-WQFN
Stock: In stock
Description: Motor Driver Dual H‑Bridge NMOS PWM 2.5A
Quantity :
Contact Now
 
 Mfr      Texas Instruments 
 Device Type  Dual H‑Bridge Motor Driver with Current Regulation
 Motor Supply Voltage (VM) 1.65 V to 11 V
 Output Current (Peak)   2.5 A    
 Output Configuration Half‑Bridge (4)
 H‑Bridge Count  2 (Dual)
 Logic Input Voltage Support 1.8V, 3.3V, and 5V logic
 Control Interface PWM
 Technology   NMOS
 Current Regulation  Integrated
 Operating Temperature -40°C to +125°C
 Package 16-WQFN
 Mounting Type
 Surface Mount
 Compliance    
 RoHS Compliant
DRV8410RTER dual H-bridge motor driver
The DRV8410RTER is a dual H-bridge motor driver housed in a compact 16-pin WQFN package with exposed PowerPAD thermal pad measuring 3.0 mm × 3.0 mm. It supports a wide motor supply voltage range from 1.65 V to 11 V and delivers up to 2.5 A per channel output current, capable of driving one or two brushed DC motors, one bipolar stepper motor, solenoids, or other inductive loads. The device integrates a tripler charge pump with all required capacitors on-chip, enabling 100% duty cycle operation and reliable performance at low supply voltages down to 1.65 V for 1.8 V system rails and low-battery conditions. This motor driver implements configurable current regulation by comparing an internal reference voltage to the voltage across external sense resistors on each channel, effectively limiting inrush currents during motor startup and stall conditions to protect both the driver and the motor. Its inputs and outputs can be paralleled to drive a single high-current brushed DC motor with half the on-resistance, offering flexible scaling for higher power requirements. 
TI motor driver Applications
The DRV8410RTER is widely deployed in battery-powered portable equipment such as robotics, toys, camera modules, and handheld instruments, where its low-voltage operation and sleep mode power savings extend battery runtime. It also serves as a compact motor control solution in consumer electronics, home appliances, printers, scanners, and small-format actuators requiring precise current control and reliable protection. In industrial and automotive auxiliary systems, the device drives small pumps, valves, positioning actuators, and cooling fans, benefiting from its wide temperature rating, robust fault handling, and small form factor for dense PCB layouts. Its ability to drive stepper motors further extends use cases to precision positioning stages, surveillance cameras, and 3D printer auxiliary axes where controlled current and smooth motion are required.
Alternativemotor controllers
1. Allegro A4950ELJTR-T: A dual full-bridge DMOS motor driver in a 4 mm × 4 mm QFN package, supporting 6.5 V to 38 V supply voltage and 2 A per channel output, with integrated current regulation and comprehensive protection for industrial and automotive motion control designs.
2. Toshiba TB67H450FNG: A dual-channel brushed DC motor driver in a 5 mm × 6.4 mm SSOP package, operating from 4.5 V to 44 V with 1.5 A per channel current capacity, featuring PWM control, overcurrent protection, and thermal shutdown for consumer and industrial motor applications.
3. ON Semiconductor NCV7729DPR2G: A dual H-bridge motor driver qualified for automotive applications, with 4.5 V to 28 V operating range, 2.5 A peak current per channel, and integrated diagnostic features, ideal for body electronics and small actuator control in vehicle systems.