Model No: TPS54623RHLR
Texas Instruments TPS54623RHLR
Manufacturer: Texas Instruments
SEMICON NO.: TPS54623RHLR
Package: 14-VQFN
Stock: In stock
Description: Step-down Converter 6A Adjustable 0.6V ±1%
SEMICON NO.: TPS54623RHLR
Package: 14-VQFN
Stock: In stock
Description: Step-down Converter 6A Adjustable 0.6V ±1%
Quantity :
| Mfr | Texas Instruments |
| Device Type | Synchronous Step-down Converte |
| Input Voltage Range | 4.5 V to 17 V (VIN) |
| Output Current | 6 A (continuous) |
| Output Voltage Range | Adjustable |
| Reference Voltage | 0.6 V o 15 V |
| Voltage Reference Accuracy | 0.6 V ±1% over temperature |
| Switching Frequency | 200 kHz to 1.6 MHz |
| Integrated MOSFETs | High-side: 26 mΩ; Low-side: 19 mΩ |
| Control Topology | Current-mode control; synchronous buck (step-down) |
| Shutdown Quiescent Current | 2 µA (typical) |
| Thermal Resistance (RθJA) | 40.1°C/W |
| Operating Temperature | −40°C to 150°C |
| Package | 14-VQFN |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
TPS54623RHLR is a 6A synchronous step-down SWIFT buck converter from Texas Instruments, packed in thermally enhanced VQFN-14, supporting 4.5V to 17V input and adjustable 0.6V minimum output, built-in high-side and low-side MOSFETs, current-mode control, external clock synchronization and pulse skip mode for optimized light-load efficiency, widely used for point-of-load power regulation in communication, industrial and high-density embedded hardware.
Key features
● Integrates 26mΩ high-side and 19mΩ low-side MOSFETs to cut BOM cost and PCB space
● Configurable switching frequency from 200kHz to 1.6MHz and can synchronize to an external clock for noise-sensitive systems
● A 0.6V ±1% precise reference across full temperature range and only 2µA shutdown quiescent current
● Monotonic startup for pre-biased outputs, adjustable soft start and power sequencing
● Power good indicator, hiccup overcurrent protection, thermal shutdown and adjustable input UVLO, with junction temperature rating from -40°C to 150°C
TI SWIFT converter Common application scenarios
● Point-of-load power supply for FPGA, DSP and high-speed processor boards
● Power regulation for network switches, routers and optical communication modules
● Industrial automation control and sensor hub power rails
● High-density server and storage auxiliary power circuits
● Portable test equipment and 24V nominal input down-conversion systems
FAQ
Q: Can TPS54623RHLR work directly with pre-biased output rails? Yes, monotonic startup prevents negative voltage spikes during power-up.
Q: Is external compensation mandatory for this buck converter? Current-mode control simplifies compensation, and most standard designs work with recommended passive components.
Alternative buck converter models
● TPS54678 is a 6A synchronous buck converter with wider frequency range and smaller footprint, suited for low input voltage dense POL designs.
● TPS54302 is a 3A high voltage synchronous buck converter for cost projects that do not require 6A continuous output.
● TPS56623 is a pin-compatible simplified 6A buck variant with reduced feature set for price-sensitive power boards.
● TPS54824 is an 8A SWIFT buck converter with higher current capacity for heavy load upgrade scenarios.
Key features
● Integrates 26mΩ high-side and 19mΩ low-side MOSFETs to cut BOM cost and PCB space
● Configurable switching frequency from 200kHz to 1.6MHz and can synchronize to an external clock for noise-sensitive systems
● A 0.6V ±1% precise reference across full temperature range and only 2µA shutdown quiescent current
● Monotonic startup for pre-biased outputs, adjustable soft start and power sequencing
● Power good indicator, hiccup overcurrent protection, thermal shutdown and adjustable input UVLO, with junction temperature rating from -40°C to 150°C
TI SWIFT converter Common application scenarios
● Point-of-load power supply for FPGA, DSP and high-speed processor boards
● Power regulation for network switches, routers and optical communication modules
● Industrial automation control and sensor hub power rails
● High-density server and storage auxiliary power circuits
● Portable test equipment and 24V nominal input down-conversion systems
FAQ
Q: Can TPS54623RHLR work directly with pre-biased output rails? Yes, monotonic startup prevents negative voltage spikes during power-up.
Q: Is external compensation mandatory for this buck converter? Current-mode control simplifies compensation, and most standard designs work with recommended passive components.
Alternative buck converter models
● TPS54678 is a 6A synchronous buck converter with wider frequency range and smaller footprint, suited for low input voltage dense POL designs.
● TPS54302 is a 3A high voltage synchronous buck converter for cost projects that do not require 6A continuous output.
● TPS56623 is a pin-compatible simplified 6A buck variant with reduced feature set for price-sensitive power boards.
● TPS54824 is an 8A SWIFT buck converter with higher current capacity for heavy load upgrade scenarios.