Model No: TMP1075DSGR
Texas Instruments TMP1075DSGR
Manufacturer: Texas Instruments
SEMICON NO.: TMP1075DSGR
Package: 8-WSON
Stock: In stock
Description: IC Temperature Sensor I²C Digital Local
SEMICON NO.: TMP1075DSGR
Package: 8-WSON
Stock: In stock
Description: IC Temperature Sensor I²C Digital Local
Quantity :
| Mfr | Texas Instruments |
| Device Type | Temperature Sensor |
| Sensor Type | Digital, Local |
| Temperature Accuracy | ±0.25°C (typ), ±1°C, ±2°C |
| Supply Voltage Range | 1.62 V to 5.5 V |
| Average Supply Current | 2.7 µA (typical) |
| Shutdown Current | 0.37 µA (typical) |
| Digital Interface | I²C, SMBus; software compatible with LM75/TMP75 |
| Resolution | 12 bits, 0.0625°C (1 LSB) |
| Address Capability | Supports up to 32 I²C addresses |
| Operating Temperature | −55°C to 125°C |
| Package | 8-WSON |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
TMP1075DSGR is a high-precision digital temperature sensor from Texas Instruments, packaged in WSON-8, supporting I2C and SMBus communication with LM75 pin and software compatibility, widely adopted for thermal monitoring and over-temperature protection in low-power electronics; this 12-bit temperature sensor delivers stable reading from -55°C to 125°C and supports mixed I3C fast mode bus layout for modern embedded hardware designs.
Key features
● Typical ±0.25°C accuracy and maximum ±1°C error within -40°C to 110°C, with 1.62V to 5.5V wide supply voltage range
● Only 2.7µA average operating current and 0.37µA shutdown current for power-sensitive products
● Up to 32 unique I2C addresses to mount multiple sensors on a single bus
● Integrates an ALERT pin for hardware thermal alarm and NIST traceable measurement data
● One-shot conversion mode to reduce energy consumption during intermittent sampling.
● Typical ±0.25°C accuracy and maximum ±1°C error within -40°C to 110°C, with 1.62V to 5.5V wide supply voltage range
● Only 2.7µA average operating current and 0.37µA shutdown current for power-sensitive products
● Up to 32 unique I2C addresses to mount multiple sensors on a single bus
● Integrates an ALERT pin for hardware thermal alarm and NIST traceable measurement data
● One-shot conversion mode to reduce energy consumption during intermittent sampling.
Common application scenarios
Power supply thermal monitoring for servers and industrial modules
Battery management systems in portable devices and consumer electronics
Thermal control of laptops, single-board computers and network peripherals
HVAC and wireless environmental sensor nodes
Thermostat circuits and general industrial electromechanical temperature supervision
Power supply thermal monitoring for servers and industrial modules
Battery management systems in portable devices and consumer electronics
Thermal control of laptops, single-board computers and network peripherals
HVAC and wireless environmental sensor nodes
Thermostat circuits and general industrial electromechanical temperature supervision
FAQ
Q: Can TMP1075DSGR directly replace traditional LM75?Yes, it shares compatible pinout and register logic, which cuts firmware modification workload.
Q: What matters most for fast thermal response? Place the package leads close to the heat source as leads serve as the primary thermal conduction path.
Q: Can TMP1075DSGR directly replace traditional LM75?Yes, it shares compatible pinout and register logic, which cuts firmware modification workload.
Q: What matters most for fast thermal response? Place the package leads close to the heat source as leads serve as the primary thermal conduction path.
Alternative I2C temperature sensor models
● TMP75 is a classic I2C temperature sensor with LM75 footprint, suitable for cost-sensitive designs with lower address quantity demand.
● TMP117 is an ultra-high accuracy digital temperature sensor with ±0.1°C typical error for precision environmental instruments.
● TMP102 is a compact SOT-23 digital temperature sensor optimized for ultra-small wearable and IoT hardware.
● TMP175 supports more bus addresses and retains SMBus alert function for multi-sensor industrial monitoring networks.
● TMP75 is a classic I2C temperature sensor with LM75 footprint, suitable for cost-sensitive designs with lower address quantity demand.
● TMP117 is an ultra-high accuracy digital temperature sensor with ±0.1°C typical error for precision environmental instruments.
● TMP102 is a compact SOT-23 digital temperature sensor optimized for ultra-small wearable and IoT hardware.
● TMP175 supports more bus addresses and retains SMBus alert function for multi-sensor industrial monitoring networks.