Model No: L6362ATR
STMicroelectronics L6362ATR
Manufacturer: STMicroelectronics
SEMICON NO.: L6362ATR
Package: 12-VFDFPN
Stock: In stock
Description: Transceiver IC IO-Link 1/1
SEMICON NO.: L6362ATR
Package: 12-VFDFPN
Stock: In stock
Description: Transceiver IC IO-Link 1/1
Quantity :
| Mfr | STMicroelectronics |
| Device Type | IO-Link and SIO Mode Transceiver IC |
| Protocol | IO-Link (PHY2, 3-wire connection) |
| Number of Drivers/Receivers | 1/1 |
| Communication Modes | COM1, COM2, COM3, SIO Mode |
| Supply Voltage (VCC) | 7 V to 36 V |
| Output Current (Intervention Threshold) | 0.3 A |
| Output Current (IOL/IOH) | 310 mA |
| Quiescent Supply Current | 2.3 mA (typ) / 2.5 mA (max) |
| Propagation Delay | 400 ns @ 24V |
| On-State Resistance (High-Side) | 1 Ω (typ) @ OUT = 0.1A, TJ = 25°C |
| I/O Compatibility | 5 V and 3.3 V compatible |
| Integrated Linear Regulator | 5 V or 3.3 V, 10 mA selectable |
| Configurable Output Types | High-Side, Low-Side, Push-Pull |
| Load Driving Capability | Resistive (R), Capacitive (C), Inductive (L) |
| Output Load Drive Capability | 30 μF |
| Inductor Switching Capability | Up to 500 mJ |
| Operating Temperature | -40°C to +125°C |
| Package | 12-VFDFPN |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
The L6362ATR is an IO-Link and SIO mode communication transceiver IC from STMicroelectronics, compliant with the PHY2 (3-wire connection) standard and supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud), and COM3 (230.4 kbaud) communication modes for industrial device-side applications. Housed in a miniaturized VFDFPN-12 package measuring just 3mm x 3mm x 0.90mm, this device integrates a fully protected output stage configurable as high-side, low-side, or push-pull, capable of driving resistive, capacitive, and inductive loads up to 500mJ. Operating from a wide 7V to 36V supply voltage range across -40°C to +125°C ambient temperature, the transceiver features a selectable 5V or 3.3V, 10mA linear regulator, 5V/3.3V compatible I/Os, 0.3A output current intervention threshold, wake-up detection, fast demagnetization of inductive loads, and comprehensive protection including reverse polarity, overload with cut-off, overtemperature, undervoltage, overvoltage, and GND/VCC open wire detection, making it a complete physical-layer solution for industrial sensors and actuators.
The L6362ATR targets industrial sensor and actuator applications requiring IO-Link or standard digital communication interfaces. Primary applications include smart sensor nodes for proximity, pressure, temperature, flow, and level measurement in factory automation networks. The device serves IO-Link device-side transceiver functions in industrial sensors connecting to IO-Link masters, as well as actuator control interfaces for valves, relays, and solenoids in process control systems. Additional applications include programmable logic controller (PLC) input/output modules, industrial motor drives requiring digital communication interfaces, and any 24V industrial environment device requiring robust physical-layer communication with comprehensive protection against the electrical stresses common in factory floor installations.
FAQ
Q: What is the primary function of the L6362ATR?
A: The device serves as the physical-layer transceiver (PHY) on the device side of an IO-Link system, handling line driving, signal reception, and protection between the industrial 24V line and a sensor's microcontroller.
Q: What protection features are integrated?
A: The device includes reverse polarity protection, overload with cut-off function, overtemperature shutdown, undervoltage and overvoltage detection, and GND/VCC open wire protection across all critical pins.
Alternative IO-Link Transceiver Models
1. L6360TR (STMicroelectronics): The IO-Link master port counterpart with I2C-based control, programmable 200mA push-pull power stage, and diagnostic LED drivers for master-side implementations.
2. L6364W (STMicroelectronics): A dual-channel transceiver IC for SIO and IO-Link sensor applications with SPI control, integrated DC-DC conversion, and UART support for advanced multi-channel designs.
3. MAX14828 (Analog Devices/Maxim): A low-power, ultra-small IO-Link device transceiver with 24V digital output, selectable 50mA-250mA driver current, and SPI or pin-control interface for sensor applications.
FAQ
Q: What is the primary function of the L6362ATR?
A: The device serves as the physical-layer transceiver (PHY) on the device side of an IO-Link system, handling line driving, signal reception, and protection between the industrial 24V line and a sensor's microcontroller.
Q: What protection features are integrated?
A: The device includes reverse polarity protection, overload with cut-off function, overtemperature shutdown, undervoltage and overvoltage detection, and GND/VCC open wire protection across all critical pins.
Alternative IO-Link Transceiver Models
1. L6360TR (STMicroelectronics): The IO-Link master port counterpart with I2C-based control, programmable 200mA push-pull power stage, and diagnostic LED drivers for master-side implementations.
2. L6364W (STMicroelectronics): A dual-channel transceiver IC for SIO and IO-Link sensor applications with SPI control, integrated DC-DC conversion, and UART support for advanced multi-channel designs.
3. MAX14828 (Analog Devices/Maxim): A low-power, ultra-small IO-Link device transceiver with 24V digital output, selectable 50mA-250mA driver current, and SPI or pin-control interface for sensor applications.
