Model No: SZESD7008MUTAG
onsemi SZESD7008MUTAG
Manufacturer: onsemi
SEMICON NO.: SZESD7008MUTAG
Package: 18-UFDFN
Stock: In stock
Description: IC TVS Diode Array 8 Channels
SEMICON NO.: SZESD7008MUTAG
Package: 18-UFDFN
Stock: In stock
Description: IC TVS Diode Array 8 Channels
Quantity :
| Mfr | onsemi |
| Device Type | ESD Protection Diode / TVS Diode Array |
| Number of Lines / Channels | 8 |
| Configuration | Bidirectional, Unidirectional Channels |
| Working / Standoff Voltage | 5 V (Max) |
| Peak Pulse Current | 1 A |
| Capacitance | 0.12 pF (Typical @ 1MHz) / 0.15 pF Max |
| Leakage Current | 1 µA (Max) |
| Surge Current | Up to 16 A |
| Operating Temp | -55°C to +125°C |
| Package | 18-UFDFN |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
SZESD7008MUTAG ESD Protection Diode
The SZESD7008MUTAG is an AEC-Q101 qualified, 8-channel ultra-low capacitance ESD (Electrostatic Discharge) protection array from onsemi (formerly Semtech Protectronics), designed to safeguard high-speed data lines such as HDMI, DisplayPort, USB 3.0, and eSATA interfaces against ESD, EFT, and lightning-induced surges. This device integrates eight independent surge protection channels in a compact 10-pin uDFN (Micro Dual Flat No-leads) package measuring only 2.5 mm × 1.0 mm × 0.55 mm with a 0.5 mm pitch, making it ideal for space-constrained portable electronics and automotive infotainment systems. Each line features a standoff voltage of 5.5 V (typical) with a breakdown voltage of 6.8 V min, clamping voltage of 12 V @ 1 A (IEC 61000-4-5 surge), and an extremely low typical line-to-line capacitance of 0.5 pF, ensuring minimal signal degradation even at multi-gigabit data rates.
The SZESD7008MUTAG ESD Protection Array is commonly deployed in:
● High-speed consumer interfaces: HDMI 1.4/2.0, DisplayPort, USB 3.x, and eSATA ports in laptops, tablets, and set-top boxes where sub-1 pF capacitance prevents eye-diagram closure.
● Automotive multimedia and telematics: AEC-Q101 qualification makes it suitable for USB charging ports, infotainment touchscreens, and rear-seat entertainment systems exposed to v ESD from user handling.
● Industrial data communication ports: RS-485/RS-232 front-ends, Ethernet magnetics secondary side, and sensor bus lines in harsh EMI environments.
● Mobile and wearable devices: the ultra-small uDFN footprint and < 100 nA leakage align with tight board-space and low-power constraints of smartphones, smartwatches, and IoT edge nodes.
● Medical diagnostic equipment: protects sensitive analog-front-end and digital links from ESD during patient-connected probe insertion/removal.
Alternative TVS Diodes
1. ESD7008MUTAG: Standard (non-automotive) grade version of the same 8-channel 0.5 pF ESD array in uDFN-10, meeting IEC 61000-4-2 Level 4 but without AEC-Q101 qualification, suitable for commercial consumer electronics.
2. SZESD7004MUTAG: AEC-Q101 qualified 4-channel version in uDFN-8 with identical per-line capacitance and clamping specs, ideal when fewer protected lanes are required in the same miniature footprint family.
3. TPD8E003DQDR: Texas Instruments 8-channel ultra-low-cap ESD protection array in WSON-10 with similar 0.5 pF typ capacitance and IEC 61000-4-2 compliance, often used as a second source in HDMI/DisplayPort designs.
4. SRV05-4.TCT: Semtech 4-channel low-capacitance TVS array in SOT-553; not pin-compatible but functionally related for protecting lower-count high-speed ports when board space permits larger package.
5. NUP4202W1T2G: onsemi 4-channel USB 2.0 ESD protector in SOT-723 with ~1 pF capacitance; lower performance but lower cost, applicable to lower-speed (480 Mbps) interfaces where the 0.5 pF spec is not mandatory.
The SZESD7008MUTAG is an AEC-Q101 qualified, 8-channel ultra-low capacitance ESD (Electrostatic Discharge) protection array from onsemi (formerly Semtech Protectronics), designed to safeguard high-speed data lines such as HDMI, DisplayPort, USB 3.0, and eSATA interfaces against ESD, EFT, and lightning-induced surges. This device integrates eight independent surge protection channels in a compact 10-pin uDFN (Micro Dual Flat No-leads) package measuring only 2.5 mm × 1.0 mm × 0.55 mm with a 0.5 mm pitch, making it ideal for space-constrained portable electronics and automotive infotainment systems. Each line features a standoff voltage of 5.5 V (typical) with a breakdown voltage of 6.8 V min, clamping voltage of 12 V @ 1 A (IEC 61000-4-5 surge), and an extremely low typical line-to-line capacitance of 0.5 pF, ensuring minimal signal degradation even at multi-gigabit data rates.
The SZESD7008MUTAG ESD Protection Array is commonly deployed in:
● High-speed consumer interfaces: HDMI 1.4/2.0, DisplayPort, USB 3.x, and eSATA ports in laptops, tablets, and set-top boxes where sub-1 pF capacitance prevents eye-diagram closure.
● Automotive multimedia and telematics: AEC-Q101 qualification makes it suitable for USB charging ports, infotainment touchscreens, and rear-seat entertainment systems exposed to v ESD from user handling.
● Industrial data communication ports: RS-485/RS-232 front-ends, Ethernet magnetics secondary side, and sensor bus lines in harsh EMI environments.
● Mobile and wearable devices: the ultra-small uDFN footprint and < 100 nA leakage align with tight board-space and low-power constraints of smartphones, smartwatches, and IoT edge nodes.
● Medical diagnostic equipment: protects sensitive analog-front-end and digital links from ESD during patient-connected probe insertion/removal.
Alternative TVS Diodes
1. ESD7008MUTAG: Standard (non-automotive) grade version of the same 8-channel 0.5 pF ESD array in uDFN-10, meeting IEC 61000-4-2 Level 4 but without AEC-Q101 qualification, suitable for commercial consumer electronics.
2. SZESD7004MUTAG: AEC-Q101 qualified 4-channel version in uDFN-8 with identical per-line capacitance and clamping specs, ideal when fewer protected lanes are required in the same miniature footprint family.
3. TPD8E003DQDR: Texas Instruments 8-channel ultra-low-cap ESD protection array in WSON-10 with similar 0.5 pF typ capacitance and IEC 61000-4-2 compliance, often used as a second source in HDMI/DisplayPort designs.
4. SRV05-4.TCT: Semtech 4-channel low-capacitance TVS array in SOT-553; not pin-compatible but functionally related for protecting lower-count high-speed ports when board space permits larger package.
5. NUP4202W1T2G: onsemi 4-channel USB 2.0 ESD protector in SOT-723 with ~1 pF capacitance; lower performance but lower cost, applicable to lower-speed (480 Mbps) interfaces where the 0.5 pF spec is not mandatory.
