Model No: ADP151AUJZ-1.5-R7
Analog Devices Inc. ADP151AUJZ-1.5-R7
Manufacturer: Analog Devices Inc.
SEMICON NO.: ADP151AUJZ-1.5-R7
Package: TSOT-23-5
Stock: In stock
Description: Regulator Linear 1 Output 200mA
SEMICON NO.: ADP151AUJZ-1.5-R7
Package: TSOT-23-5
Stock: In stock
Description: Regulator Linear 1 Output 200mA
Quantity :
| Mfr | Analog Devices Inc. |
| Fixed Output Voltage | 1.5 V |
| Input Voltage Range (VIN) | 2.3 V to 5.5 V |
| Maximum Output Current (IOUT) | 200 mA |
| Dropout Voltage | 110 mV (Typical) |
| Noise | 9 µVRMS (Typical) |
| Quiescent Current (IQ) | 30 µA (Typical) |
| Shutdown Current | < 1 µA |
| Protection Features | Current Limit, Thermal Shutdown |
| Operating Temperature | -40°C to +125°C |
| Package | TSOT-23-5 |
| Mounting Type | Surface Mount (SMD/SMT) |
| Compliance | RoHS Compliant |
ADP151AUJZ-1.5-R7 High PSRR CMOS Linear Regulator (LDO) 200 mA
ADP151AUJZ-1.5-R7 is an ultra-low-noise, fixed 1.5 V, 200 mA LDO from Analog Devices that integrates a high-PSRR regulator and enable logic in a 1.0 mm × 1.0 mm WLCSP-4 package, delivering 40 µVRMS output noise (10 Hz–100 kHz), 70 dB PSRR at 1 kHz and 1.2 V dropout at 200 mA while drawing only 10 µA ground current. Operating from 2.2 V to 5.5 V input, it provides ±1 % accuracy over −40 °C to +125 °C, features 1 µs soft-start to limit in-rush and is qualified for AEC-Q100 Grade-1 automotive use, making it ideal for RF, image sensor and precision ADC rails in space-constrained wearables, smartphones and ADAS cameras .
ADP151AUJZ-1.5-R7 Linear Regulator Application
1. Smartphone camera VCM drivers
2. ADAS radar transceivers
3. Wearable health monitors
4. Precision instrumentation
5. DDR3L memory termination
AlternativesLDO RegulatorModels
TI TPS7A02-15YCHR: 1.5 V, 200 mA, 0.5 µA IQ, DSBGA-4, lowest power for IoT endpoints.
ON Semi NCP167AMX280TBG: 1.5 V, 300 mA, 20 µVRMS noise, XDFN-4, for studio audio DACs.
● Renesas RAA214250: 1.5 V, 200 mA, 38 µA IQ, DFN-6, integrated power-good for sequencing.
● STMicroelectronics LD39130S: 1.5 V, 300 mA, 20 µVRMS, flip-chip CSP, cost-optimized for smartphones.
● Infineon TLS810D1LDV15: 1.5 V, 100 mA, 38 µA IQ, TSON-10, AEC-Q100 Grade-1 for under-hood sensors.
ADP151AUJZ-1.5-R7 is an ultra-low-noise, fixed 1.5 V, 200 mA LDO from Analog Devices that integrates a high-PSRR regulator and enable logic in a 1.0 mm × 1.0 mm WLCSP-4 package, delivering 40 µVRMS output noise (10 Hz–100 kHz), 70 dB PSRR at 1 kHz and 1.2 V dropout at 200 mA while drawing only 10 µA ground current. Operating from 2.2 V to 5.5 V input, it provides ±1 % accuracy over −40 °C to +125 °C, features 1 µs soft-start to limit in-rush and is qualified for AEC-Q100 Grade-1 automotive use, making it ideal for RF, image sensor and precision ADC rails in space-constrained wearables, smartphones and ADAS cameras .
ADP151AUJZ-1.5-R7 Linear Regulator Application
1. Smartphone camera VCM drivers
2. ADAS radar transceivers
3. Wearable health monitors
4. Precision instrumentation
5. DDR3L memory termination
AlternativesLDO RegulatorModels
TI TPS7A02-15YCHR: 1.5 V, 200 mA, 0.5 µA IQ, DSBGA-4, lowest power for IoT endpoints.
ON Semi NCP167AMX280TBG: 1.5 V, 300 mA, 20 µVRMS noise, XDFN-4, for studio audio DACs.
● Renesas RAA214250: 1.5 V, 200 mA, 38 µA IQ, DFN-6, integrated power-good for sequencing.
● STMicroelectronics LD39130S: 1.5 V, 300 mA, 20 µVRMS, flip-chip CSP, cost-optimized for smartphones.
● Infineon TLS810D1LDV15: 1.5 V, 100 mA, 38 µA IQ, TSON-10, AEC-Q100 Grade-1 for under-hood sensors.
