Model No: SN74LV1T125DCKR
Texas Instruments SN74LV1T125DCKR
Manufacturer: Texas Instruments
SEMICON NO.: SN74LV1T125DCKR
Package: SC-70-5
Stock: In stock
Description: Single Buffer Gate 3‑State Output
SEMICON NO.: SN74LV1T125DCKR
Package: SC-70-5
Stock: In stock
Description: Single Buffer Gate 3‑State Output
Quantity :
| Mfr | Texas Instruments |
| Device Type | Single Buffer Gate with 3‑State Output and Voltage Translation |
| Logic Family | 74LV |
| Number of Channels / Elements | 1 |
| Bits per Element | 1 bit |
| Logic Function | Non-Inverting Buffer |
| Output Type | 3‑State |
| Polarity | Non-Inverting |
| Supply Voltage Range (VCC) | 1.6 V to 5.5 V |
| Operating Range (Recommended) | 1.8 V to 5.5 V |
| Quiescent Current (IQ) | 1 µA to 10 µA |
| Output Current (IOH / IOL) | ±8 mA |
| Operating Temperature | -40°C to +125°C |
| Package | SC-70-5 |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
SN74LV1T125DCKR non-inverting 3-state buffer
SN74LV1T125DCKR is an active single-channel non-inverting 3-state buffer and single-supply logic level translator manufactured by Texas Instruments, shipped in tape-and-reel SC-70-5 (5-TSSOP) ultra-small surface-mount packaging for high-density SMT PCB assembly, fully RoHS3 and REACH compliant with MSL 1 unlimited moisture sensitivity rating, supporting a wide 1.8 V to 5.5 V single supply voltage and industrial temperature range of -40 °C to 125 °C, equipped with an active-low output enable pin to switch the output between normal buffered signal and high-impedance bus isolation mode, featuring 5 V tolerant input pins and reduced input threshold circuits to realize bidirectional logic voltage shifting between 1.2 V, 1.8 V, 2.5 V, 3.3 V and 5 V logic domains without extra discrete level shift components, and built with low-power LV1T CMOS process to deliver compact signal buffering and bus multiplexing for miniature battery-powered and industrial embedded hardware.
SN74LV1T125DCKR is an active single-channel non-inverting 3-state buffer and single-supply logic level translator manufactured by Texas Instruments, shipped in tape-and-reel SC-70-5 (5-TSSOP) ultra-small surface-mount packaging for high-density SMT PCB assembly, fully RoHS3 and REACH compliant with MSL 1 unlimited moisture sensitivity rating, supporting a wide 1.8 V to 5.5 V single supply voltage and industrial temperature range of -40 °C to 125 °C, equipped with an active-low output enable pin to switch the output between normal buffered signal and high-impedance bus isolation mode, featuring 5 V tolerant input pins and reduced input threshold circuits to realize bidirectional logic voltage shifting between 1.2 V, 1.8 V, 2.5 V, 3.3 V and 5 V logic domains without extra discrete level shift components, and built with low-power LV1T CMOS process to deliver compact signal buffering and bus multiplexing for miniature battery-powered and industrial embedded hardware.
With ultra-compact form factor, multi-voltage translation and 3-state bus isolation capability, SN74LV1T125DCKR serves as core signal conditioning hardware for portable notebook and tablet peripheral interface circuits, industrial controller sensor signal level matching, automotive low-voltage ECU communication lines, compact IoT sensor gateway signal buffers, server and telecom board bus expansion modules, handheld measurement instruments, battery-powered consumer wearable devices, and FPGA/MCU auxiliary I/O expansion routing boards, its single-gate tiny packaging eliminates unnecessary multi-channel logic waste for single-signal isolation and level shift tasks while wide temperature tolerance guarantees stable performance in outdoor factory and vehicle electronic environments with fluctuating power rails.
Alternative bus buffer chips
● SN74LV1T126DCKR: Pin-compatible SC-70-5 single 3-state buffer with identical voltage translation specs, equipped with active-high enable pin for opposite bus control logic requirements.
● 74LVC1G125GW: Nexperia cross-brand single 3-state translating buffer in matching SC-70-5 footprint, acting as direct drop-in substitute during TI component stock shortages.
● SN74LV4T125PWR: Quad 4-channel 3-state bus buffer in TSSOP-14 package with identical level shift performance, ideal for multi-signal bus isolation circuits to reduce total component count.
● SN74LV1T34DCKR: SC-70-5 single non-inverting buffer without 3-state output function, optimized for simple unidirectional signal buffering tasks without bus isolation demands.
● SN74LV1T126DCKR: Pin-compatible SC-70-5 single 3-state buffer with identical voltage translation specs, equipped with active-high enable pin for opposite bus control logic requirements.
● 74LVC1G125GW: Nexperia cross-brand single 3-state translating buffer in matching SC-70-5 footprint, acting as direct drop-in substitute during TI component stock shortages.
● SN74LV4T125PWR: Quad 4-channel 3-state bus buffer in TSSOP-14 package with identical level shift performance, ideal for multi-signal bus isolation circuits to reduce total component count.
● SN74LV1T34DCKR: SC-70-5 single non-inverting buffer without 3-state output function, optimized for simple unidirectional signal buffering tasks without bus isolation demands.
