Model No: ADS9813RSHR

Texas Instruments ADS9813RSHR

Manufacturer: Texas Instruments
SEMICON NO.: ADS9813RSHR
Package: 56-VQFN
Stock: In stock
Description: Simultaneous-Sampling ADC 18-Bit 2-MSPS 8-Ch
Quantity :
Contact Now
 
 Mfr       Texas Instruments 
 Device Type   Simultaneous-Sampling SAR ADC
 Architecture     Successive Approximation Register (SAR)
 Resolution   18-bit
 Number of Channels  8 
 Sampling Rate (per Channel)   2 MSPS
 DNL (Differential Nonlinearity)     ±0.35 LSB
 INL (Integral Nonlinearity)   ±0.8 LSB
 SNR (Signal-to-Noise Ratio)   90.3 dBFS
 THD (Total Harmonic Distortion)   –113 dB
 AFE Input Impedance     Constant 1 MΩ
 Input Configuration     Single-ended and Differential
 Programmable Input Ranges     ±12V, ±10V, ±7V, ±5V, ±3.5V, ±2.5V (Bipolar)
 Common-Mode Voltage Range     ±12V
 Input Overvoltage Protection     Up to ±18V
 Reference Drift     20 ppm/°C
 Interface Type     SPI
 Analog Supply     4.75V to 5.25V (5V nominal)
 Digital Supply     1.75V to 1.85V (1.8V nominal)
 Operating Temperature    –40°C to +125°C
 Package 56-VQFN
 Mounting Type
 Surface Mount
 Compliance    
 RoHS Compliant
 
ADS9813RSHR 18-Bit, 2-MSPS, 8-Channel Simultaneous-Sampling ADC 56-VQFN
The ADS9813RSHR is an eight-channel data acquisition system from Texas Instruments, built around a simultaneous-sampling 18-bit SAR analog-to-digital converter with a complete analog front end on every channel. Each input has a constant 1 MOhm impedance and a programmable gain amplifier with selectable bandwidth, so sensors, transformers and probes connect directly without external driver amplifiers. Programmable bipolar ranges from +/-12 V down to +/-2.5 V pair with a +/-12 V common-mode range and overvoltage protection to +/-18 V. Integrated low-drift references and a 1.2 V to 1.8 V digital interface simplify the design. Running from 5 V analog and 1.8 V digital supplies over -40 C to +125 C, it comes in a 56-VQFN (RSH) measuring 7 mm x 7 mm.
Applications
● Semiconductor automated test equipment (ATE) and device parametric test.
● Programmable DC power supplies and precision source-measure instruments.
● Parametric measurement units (PMU) and pin-electronics front ends.
● Multi-channel data acquisition for industrial measurement and instrumentation.
Frequently Asked Questions
‌Q: Why is it different from an ordinary ADC?‌ A: Each channel carries a complete front end with a constant 1 MOhm input, so no external driver amplifiers are needed.
‌Q: Which input ranges are available?‌ A: Six programmable bipolar ranges: +/-2.5 V, +/-3.5 V, +/-5 V, +/-7 V, +/-10 V and +/-12 V.
‌Q: What are the key precautions?‌ A: Keep channels within the programmed range and below the +/-18 V clamp, and follow the recommended reference decoupling and VQFN layout guidance.
Alternative SAR ADC Models
‌● ADS9811‌, the 1-MSPS version of the same 8-channel integrated-front-end ADC for lower-speed acquisition.
● ‌ADS9810‌, a 1-MSPS family member with a reduced feature set in the identical 56-pin VQFN.
‌● ADS9817‌, the pin-for-pin 2-MSPS device with 4-channel x 2 multiplexed inputs.
‌● ADS8588S‌, an eight-channel 16-bit simultaneous-sampling ADC for designs trading resolution for cost.