Model No: OPA140AIDBVR
Texas Instruments OPA140AIDBVR
Manufacturer: Texas Instruments
SEMICON NO.: OPA140AIDBVR
Package: SOT-23-5
Stock: In stock
Description: IC Operational Amplifier JFET 1 CIRCUIT
SEMICON NO.: OPA140AIDBVR
Package: SOT-23-5
Stock: In stock
Description: IC Operational Amplifier JFET 1 CIRCUIT
Quantity :
| Mfr | Texas Instruments |
| Device Type | JFET Input Precision Operational Amplifier (Op Amp) |
| Number of Channels | 1 (Single) |
| Amplifier Type | J-FET |
| Output Type | Rail-to-Rail |
| Gain Bandwidth Product (GBP) | 11 MHz |
| Slew Rate (SR) | 20 V/µs |
| Input Offset Voltage (Vos) | 120 µV (max) |
| Input Offset Voltage Drift | 1 µV/°C (max) |
| Input Bias Current (Ib) | 10 pA (max) |
| Input Voltage Noise Density | 5.1 nV/√Hz (at 1 kHz) |
| Common Mode Rejection Ratio (CMRR) | 126 dB (typ) |
| Supply Voltage - Single (Vs) | 4.5 V to 36 V |
| Supply Voltage - Dual (Vs) | ±2.25 V to ±18 V |
| Output Current (Iout) | 36 mA |
| Operating Temperature | -40°C to +125°C |
| Package | SOT-23-5 |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
OPA140AIDBVR High-Precision, Low-Noise, Rail-to-Rail Output JFET Op Amp
The OPA140AIDBVR is a high-performance, low-power JFET-input operational amplifier from Texas Instruments, specifically designed for precision applications requiring excellent drift performance and ultra-low input bias current. Housed in a compact 5-pin SOT-23 surface-mount package measuring just 2.9mm × 1.6mm, this device delivers 11MHz unity-gain bandwidth and 20V/µs slew rate while consuming only 1.8mA typical quiescent current. The OPA140AIDBVR operates from a wide supply voltage range of 4.5V to 36V single supply or ±2.25V to ±18V dual supplies, with full specifications guaranteed across the extended industrial temperature range of -40°C to +125°C .
OPA140AIDBVR Op Amp Applications
• Battery-Powered Instruments: Portable test equipment and handheld devices leveraging low 1.8mA supply current.
• Industrial Controls: Precision sensor conditioning, process control loops, and factory automation systems.
• Medical Instrumentation: Patient monitoring equipment and diagnostic instruments requiring low noise and high accuracy.
• Photodiode Amplifiers: Transimpedance amplifiers for light detection with minimal bias current errors.
• Active Filters: High-order filter designs in audio and instrumentation signal chains.
• Data Acquisition Systems: ADC driver and buffer applications for 16-bit and higher resolution converters.
• Automatic Test Systems: ATE pin drivers and precision measurement channels .
AlternativeFET amplifiersolutions
For designers seeking alternative precision JFET amplifier solutions, consider the OPA140AID which provides identical electrical specifications in a standard 8-pin SOIC package for easier prototyping and hand-soldering. The OPA140AIDGKR offers the same performance in an 8-pin MSOP package for space-constrained designs requiring more pins for additional compensation options. The OPA2140 delivers dual-channel configuration in 8-pin SOIC or MSOP packages for multichannel applications requiring matched characteristics. The OPA145 from Texas Instruments provides similar JFET input performance with 5.5MHz bandwidth and lower power consumption for battery-operated systems. The ADA4610-1 from Analog Devices offers comparable precision with enhanced rail-to-rail input capability for wide dynamic range applications.
The OPA140AIDBVR is a high-performance, low-power JFET-input operational amplifier from Texas Instruments, specifically designed for precision applications requiring excellent drift performance and ultra-low input bias current. Housed in a compact 5-pin SOT-23 surface-mount package measuring just 2.9mm × 1.6mm, this device delivers 11MHz unity-gain bandwidth and 20V/µs slew rate while consuming only 1.8mA typical quiescent current. The OPA140AIDBVR operates from a wide supply voltage range of 4.5V to 36V single supply or ±2.25V to ±18V dual supplies, with full specifications guaranteed across the extended industrial temperature range of -40°C to +125°C .
OPA140AIDBVR Op Amp Applications
• Battery-Powered Instruments: Portable test equipment and handheld devices leveraging low 1.8mA supply current.
• Industrial Controls: Precision sensor conditioning, process control loops, and factory automation systems.
• Medical Instrumentation: Patient monitoring equipment and diagnostic instruments requiring low noise and high accuracy.
• Photodiode Amplifiers: Transimpedance amplifiers for light detection with minimal bias current errors.
• Active Filters: High-order filter designs in audio and instrumentation signal chains.
• Data Acquisition Systems: ADC driver and buffer applications for 16-bit and higher resolution converters.
• Automatic Test Systems: ATE pin drivers and precision measurement channels .
AlternativeFET amplifiersolutions
For designers seeking alternative precision JFET amplifier solutions, consider the OPA140AID which provides identical electrical specifications in a standard 8-pin SOIC package for easier prototyping and hand-soldering. The OPA140AIDGKR offers the same performance in an 8-pin MSOP package for space-constrained designs requiring more pins for additional compensation options. The OPA2140 delivers dual-channel configuration in 8-pin SOIC or MSOP packages for multichannel applications requiring matched characteristics. The OPA145 from Texas Instruments provides similar JFET input performance with 5.5MHz bandwidth and lower power consumption for battery-operated systems. The ADA4610-1 from Analog Devices offers comparable precision with enhanced rail-to-rail input capability for wide dynamic range applications.
