Model No: NCP1075STBT3G
onsemi NCP1075STBT3G
Manufacturer: onsemi
SEMICON NO.: NCP1075STBT3G
Package: SOT-223
Stock: In stock
Description: Switcher 700V MOSFET Power Offline SMPS
SEMICON NO.: NCP1075STBT3G
Package: SOT-223
Stock: In stock
Description: Switcher 700V MOSFET Power Offline SMPS
Quantity :
| Mfr | onsemi |
| Device Type | High-Voltage Switcher for Low Power Offline SMPS |
| Topology | Flyback (Isolated) |
| Internal Switch(s) | Yes |
| Output Power (Max) | 19 W |
| Number of Outputs | 1 |
| Breakdown Voltage | 700 V 6.3 V to 10 V |
| Input Voltage (Vcc/Vdd) | 6.3 V to 10 V |
| Start-Up Voltage | 8.2 V |
| Operating Supply Voltage | 7.8 V to 8.6 V |
| Switching Frequency | 100 kHz |
| Output Current (Max) | 450 mA |
| Control Mode | Current-Mode, Fixed Frequency |
| Operating Temperature | -40°C to +125°C |
| Package | SOT-223 |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
NCP1075STBT3G Current Mode Controller
The NCP1075STBT3G is a highly integrated offline switching regulator from ON Semiconductor, engineered for low-power isolated flyback switched-mode power supply (SMPS) applications. Housed in a compact SOT-223 surface-mount package, this device merges a fixed-frequency current-mode PWM controller with a 700 V rated power MOSFET featuring 11 Ω on-state resistance, delivering a maximum output power of 19 W at 230 Vac input and 10 W across the universal 85–265 Vac input range. It operates at a nominal 100 kHz switching frequency, and adopts a dynamic self-supply (DSS) architecture that removes the need for an auxiliary winding, cutting bill-of-materials cost and simplifying circuit layout. With a rated peak drain current of 450 mA, the device achieves no-load standby power consumption as low as 300 µA through optimized light-load management, and supports a maximum junction temperature of 150 °C to ensure stable operation in thermally demanding industrial and consumer scenarios.
The NCP1075STBT3G is primarily utilized in auxiliary and standby power supplies for a broad spectrum of end products, including household appliances, set-top boxes, network routers, and industrial control equipment where continuous low-power bias rails are required for system standby functionality. It is also well suited for low-power AC-DC adapters, smart metering power stages, IoT edge node power supplies, and battery charger front-ends that demand compact form factor, low standby consumption, and reliable isolation performance. Its high level of integration and minimal external component requirements make it an optimal choice for space-constrained designs.
Alternative offline flyback regulator
1. STMicroelectronics VIPER16LD: A quasi-resonant offline flyback controller integrating a 700 V power MOSFET, available in SSOP-10 package, with ultra-low standby power and comprehensive protection features, optimized for 10–25 W auxiliary and consumer power supplies.
2. Infineon ICE3B0365J: A CoolSET series current-mode PWM controller with an integrated 650 V MOSFET, offered in DIP-7 package, featuring active burst mode for low standby consumption and full fault protection, widely adopted in 10–15 W industrial and consumer SMPS.
3. Power Integrations LNK364DN: A LinkSwitch-II primary-side regulated offline switch with a 700 V integrated MOSFET, in DIP-8 package, eliminating the need for optocouplers and secondary feedback circuits, ideal for compact 10 W class isolated power supplies.
The NCP1075STBT3G is a highly integrated offline switching regulator from ON Semiconductor, engineered for low-power isolated flyback switched-mode power supply (SMPS) applications. Housed in a compact SOT-223 surface-mount package, this device merges a fixed-frequency current-mode PWM controller with a 700 V rated power MOSFET featuring 11 Ω on-state resistance, delivering a maximum output power of 19 W at 230 Vac input and 10 W across the universal 85–265 Vac input range. It operates at a nominal 100 kHz switching frequency, and adopts a dynamic self-supply (DSS) architecture that removes the need for an auxiliary winding, cutting bill-of-materials cost and simplifying circuit layout. With a rated peak drain current of 450 mA, the device achieves no-load standby power consumption as low as 300 µA through optimized light-load management, and supports a maximum junction temperature of 150 °C to ensure stable operation in thermally demanding industrial and consumer scenarios.
The NCP1075STBT3G is primarily utilized in auxiliary and standby power supplies for a broad spectrum of end products, including household appliances, set-top boxes, network routers, and industrial control equipment where continuous low-power bias rails are required for system standby functionality. It is also well suited for low-power AC-DC adapters, smart metering power stages, IoT edge node power supplies, and battery charger front-ends that demand compact form factor, low standby consumption, and reliable isolation performance. Its high level of integration and minimal external component requirements make it an optimal choice for space-constrained designs.
Alternative offline flyback regulator
1. STMicroelectronics VIPER16LD: A quasi-resonant offline flyback controller integrating a 700 V power MOSFET, available in SSOP-10 package, with ultra-low standby power and comprehensive protection features, optimized for 10–25 W auxiliary and consumer power supplies.
2. Infineon ICE3B0365J: A CoolSET series current-mode PWM controller with an integrated 650 V MOSFET, offered in DIP-7 package, featuring active burst mode for low standby consumption and full fault protection, widely adopted in 10–15 W industrial and consumer SMPS.
3. Power Integrations LNK364DN: A LinkSwitch-II primary-side regulated offline switch with a 700 V integrated MOSFET, in DIP-8 package, eliminating the need for optocouplers and secondary feedback circuits, ideal for compact 10 W class isolated power supplies.