Model No: TLE6240GPAUMA1
Infineon Technologies TLE6240GPAUMA1
Manufacturer: Infineon Technologies
SEMICON NO.: TLE6240GPAUMA1
Package: PG-DSO-36-48
Stock: In stock
Description: IC Power Switch/Driver N-Channel 1:1 DSO-36
SEMICON NO.: TLE6240GPAUMA1
Package: PG-DSO-36-48
Stock: In stock
Description: IC Power Switch/Driver N-Channel 1:1 DSO-36
Quantity :
| Mfr | Infineon Technologies |
| Type | 16-Channel Low-Side Power Switch |
| Output Configuration | Low-Side, N-Channel DMOS |
| Channels | 16 (8 configurable for PWM) |
| Interface | SPI (Serial Peripheral Interface) |
| Supply Voltage (Vcc) | 4.5V – 5.5V |
| Load Voltage (Max) | 45V |
| On-Resistance (Rds(on)) | - 300mΩ, 350mΩ, 1Ω (Typ) - 8 × 1.7Ω, 4 × 0.6Ω, 4 × 0.5Ω (Typ @150°C) |
| Output Current | - 0.5A (Min) - 1A to 3A (per channel, depending on configuration) |
| Peak Current | 1.5A (per channel) |
| Power Dissipation | 3.3W (Max) |
| Quiescent Current | 5mA (Max) |
| Protection Features | Open Load Detection, Over-Temperature, Over-Voltage, Short-Circuit Protection |
| Operating Temperature | -40°C to +150°C |
| Package/Sizes | PG-DSO-36-48 |
| RoHS Compliance | RoHS compliant, lead-free |
TLE6240GPAUMA1 Power Switch/Driver IC, Low-side switch
The TLE6240GPAUMA1 is a smart 16-channel low-side switch designed for automotive and industrial applications, featuring embedded protection functions and control via an SPI interface. It is housed in a PG-DSO-36 package and is suitable for applications such as engine management and powertrain systems, safety and body applications. The device is RoHS compliant and features a wide operating temperature range of -40°C to 150°C.
The TLE6240GPAUMA1 offers comprehensive protection features, including short circuit protection, overtemperature protection, and overvoltage protection. Each output stage has its own zener clamp to limit voltage when inductive loads are switched off. The outputs are provided with current limitation, set to a minimum of 1 A for channels 1 to 8 and 3 A for channels 9 to 16. In case of overload or short to supply, the current is internally limited, and the corresponding diagnosis bit combination is set. If this leads to an overtemperature condition, a second protection level changes the output into a low duty cycle PWM to prevent critical chip temperatures.
The device supports both serial and parallel control options. It features a 16-bit serial data input and diagnostic output, with 2 bits per channel for open load and short-to-GND detection. Additionally, 8 channels can be controlled directly in parallel for PWM applications. The TLE6240GPAUMA1 also includes a general fault flag and is compatible with 3 V microcontrollers. The on-resistance (RDS(on)) varies by channel, with typical values ranging from 0.5 Ω to 1.7 Ω at 150°C.
TLE6240GPAUMA1 Alternative SPI controlled switch Models
● TLE6240GP: This model is similar to the TLE6240GPAUMA1 but may have slight variations in packaging or availability. It is also designed for automotive and industrial applications and features embedded protection functions and control via SPI interface.
●TLE6240GPAUMA: This variant is likely to have similar features and specifications to the TLE6240GPAUMA1 but may differ in terms of availability or specific application suitability.
The TLE6240GPAUMA1 is a smart 16-channel low-side switch designed for automotive and industrial applications, featuring embedded protection functions and control via an SPI interface. It is housed in a PG-DSO-36 package and is suitable for applications such as engine management and powertrain systems, safety and body applications. The device is RoHS compliant and features a wide operating temperature range of -40°C to 150°C.
The TLE6240GPAUMA1 offers comprehensive protection features, including short circuit protection, overtemperature protection, and overvoltage protection. Each output stage has its own zener clamp to limit voltage when inductive loads are switched off. The outputs are provided with current limitation, set to a minimum of 1 A for channels 1 to 8 and 3 A for channels 9 to 16. In case of overload or short to supply, the current is internally limited, and the corresponding diagnosis bit combination is set. If this leads to an overtemperature condition, a second protection level changes the output into a low duty cycle PWM to prevent critical chip temperatures.
The device supports both serial and parallel control options. It features a 16-bit serial data input and diagnostic output, with 2 bits per channel for open load and short-to-GND detection. Additionally, 8 channels can be controlled directly in parallel for PWM applications. The TLE6240GPAUMA1 also includes a general fault flag and is compatible with 3 V microcontrollers. The on-resistance (RDS(on)) varies by channel, with typical values ranging from 0.5 Ω to 1.7 Ω at 150°C.
TLE6240GPAUMA1 Alternative SPI controlled switch Models
● TLE6240GP: This model is similar to the TLE6240GPAUMA1 but may have slight variations in packaging or availability. It is also designed for automotive and industrial applications and features embedded protection functions and control via SPI interface.
●TLE6240GPAUMA: This variant is likely to have similar features and specifications to the TLE6240GPAUMA1 but may differ in terms of availability or specific application suitability.
