Model No: AD5791BRUZ

Analog Devices Inc. AD5791BRUZ

Manufacturer: Analog Devices Inc.
SEMICON NO.: AD5791BRUZ
Package: 20-TSSOP
Stock: In stock
Description: 20 Bit Digital to Analog Converter 4.2 mA
Quantity :
Contact Now
 
 Mfr       Analog Devices Inc. 
 Device Type      Single-Channel, 20-Bit, Unbuffered Voltage-Output DAC
 Architecture      R-2R Ladder
 Resolution   20-bit (1 ppm)
 Integral Nonlinearity (INL)    ±1 LSB (Max)
 Differential Nonlinearity (DNL)     ±1 LSB (Max)
 Long-Term Linearity Stability     0.19 LSB
 Output Type     Voltage – Unbuffered
 Output Configuration     Bipolar
 Reference Type      External
 Analog Supply Voltage Up to ±16.5 V
 Digital Supply Voltage      2.7 V to 5.5 V
 Quiescent Current     4.2 mA (Typical)
 Interface Type     SPI, QSPI, MICROWIRE, DSP (3-Wire Serial)
 Operating Temperature    –40°C to +125°C
 Package 20-TSSOP
 Mounting Type
 Surface Mount
 Compliance    
 RoHS Compliant
 
AD5791BRUZ is a high-precision 20-bit voltage-output digital-to-analog converter from Analog Devices, supplied in a 20-TSSOP in tape-and-reel format for automated SMT assembly. Built on a precision voltage-mode R-2R ladder architecture with factory calibration, it delivers true 1 ppm resolution with a maximum ±1 LSB integral nonlinearity and ±1 LSB differential nonlinearity, guarantees monotonic operation across the full operating range, and features a 1 µs settling time with only 1.4 nV·s glitch impulse. Operating from wide dual supply rails from ±7.5 V up to ±16.5 V with a 1.8 V compatible 35 MHz SPI serial interface, this B-grade device achieves less than 0.05 ppm/°C temperature drift and 7.5 nV/√Hz output noise spectral density, maintaining stable performance across a -40°C to +125°C junction temperature range. Designed as the industry's first 1 ppm accurate monolithic DAC, it sets the benchmark for ultra-high-precision voltage generation in metrology-grade test instrumentation, industrial control and scientific measurement systems.
This ultra-high-precision DAC covers these primary application scenarios: precision programmable voltage and current references for calibration standards, metrology equipment and 6½-digit digital multimeters; arbitrary waveform generation and precision stimulus sources for automatic test equipment and semiconductor characterization systems; high-accuracy setpoint control for industrial process control, semiconductor manufacturing and scientific research instruments; medical instrumentation including diagnostic imaging, analytical chemistry equipment and precision patient monitoring devices; high-end scientific and aerospace instrumentation requiring ppm-level stability and accuracy; fine bias adjustment for high-speed data converters, optical modules and RF test systems; and closed-loop precision servo and positioning control for industrial motion control and nanopositioning stages.
FAQ
Q: Does AD5791BRUZ integrate an output buffer and internal voltage reference?
A: No, it features an unbuffered voltage output and requires external reference sources; use a high-precision low-drift reference and a precision buffer amplifier to drive low-impedance loads, and follow recommended reference force-sense layout practices to maintain full rated linearity performance.
Alternative voltage reference DAC models
AD5781BRUZ: 18-bit pin-compatible DAC with identical architecture and interface, offering a cost-optimized solution for designs that require high precision but do not need full 20-bit resolution.
DAC8771RGPT: Texas Instruments 16-bit precision voltage-output DAC with integrated reference and buffer, serving as a cross-brand alternative for integrated high-accuracy industrial control designs that prioritize BOM simplicity over ultimate 20-bit resolution.
LTC2758BILX#PBF: Analog Devices 18-bit current-output DAC with parallel interface, suitable for high-speed multi-range precision source designs requiring parallel data bus connectivity.