Model No: SN65HVD251DR
Texas Instruments SN65HVD251DR
Manufacturer: Texas Instruments
Semicon NO: SN65HVD251DR
Package: 8-SOIC (0.154", 3.90mm Width)
Stock: In stock
Description: SN65HVD251DR(Kg)
Semicon NO: SN65HVD251DR
Package: 8-SOIC (0.154", 3.90mm Width)
Stock: In stock
Description: SN65HVD251DR(Kg)
Quantity :
| Parameters | |
|---|---|
| Mfr | Texas Instruments |
| Series | Automotive, AEC-Q100 |
| Package | Tape & Reel (TR) |
| Product Status | Active |
| Type | Transceiver |
| Protocol | CANbus |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 100 mV |
| Data Rate | 1Mbps |
| Voltage - Supply | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Base Product Number | 65HVD251 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |
| Standard Package | 2,500 |
The SN65HVD251DR is a high-speed CAN bus transceiver with short loop latency manufactured by Texas Instruments. Designed to operate in harsh environments, this transceiver provides differential transmission capability to the CAN bus and is capable of receiving differential signals to the CAN controller at speeds of up to 1Mbps. It supports the ISO 11898 standard with ±36V cross-line, overvoltage and ground loss protection, overtemperature protection and tolerance for ±200V transients. In addition, the SN65HVD251DR has thermal shutdown protection to prevent catastrophic failure in the event of a bus short. Mainly used in power delivery, industrial transport (non-automotive and non-light truck), motor drives, test and measurement, medical, grid infrastructure, building automation, appliances, body electronics and lighting, factory automation and control.
Features:
- 1Mbps signal transmission rate
- ±36V bus fault protection
- High input impedance
- Bus pins have ESD protection rating exceeding 14kV HBM
- Low current standby mode
- Heat off protection
- Supports three different operating modes: high speed, slope control and low power mode, selected by p8 Rs [^12^][^14^]
Applications:
CAN data bus
Industrial automation and control
Automotive electronics
Building automation
Industrial application
Features:
- 1Mbps signal transmission rate
- ±36V bus fault protection
- High input impedance
- Bus pins have ESD protection rating exceeding 14kV HBM
- Low current standby mode
- Heat off protection
- Supports three different operating modes: high speed, slope control and low power mode, selected by p8 Rs [^12^][^14^]
Applications:
CAN data bus
Industrial automation and control
Automotive electronics
Building automation
Industrial application
