Model No: TPSM560R6RDAR
Texas Instruments TPSM560R6RDAR
Manufacturer: Texas Instruments
SEMICON NO.: TPSM560R6RDAR
Package: 15‑B3QFN
Stock: In stock
Description: PoL Module DC/DC Converter 1 Output 600mA
SEMICON NO.: TPSM560R6RDAR
Package: 15‑B3QFN
Stock: In stock
Description: PoL Module DC/DC Converter 1 Output 600mA
Quantity :
| Mfr | Texas Instruments |
| Device Type | Non-Isolated Power Module (Step-Down DC/DC Converter) |
| Input Voltage (VIN) | 4.2 V to 60 V |
| Output Configuration | Positive |
| Topology | Buck (Step‑Down) |
| Output Type | Adjustable |
| Number of Outputs | 1 |
| Output Voltage (VOUT) | 1 V to 6 V |
| Output Current (Max) | 600 mA |
| Output Power (Max) | 3.6 W |
| Efficiency (Typ) | 86% |
| Switching Frequency Range | 340 kHz to 460 kHz |
| Operating Temperature | ‑40°C to +125°C |
| Package | 15‑B3QFN |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
TPSM560R6RDAR TI integrated buck power module
The TPSM560R6RDAR is a fully integrated synchronous step-down power module designed by Texas Instruments, shipped in tape-and-reel 15-pin Enhanced HotRod™ B3QFN package. This non-isolated point-of-load converter embeds power MOSFETs, shielded inductor and internal passive components, supporting 4.2 V to 60 V wide input voltage with transient withstand up to 66 V, adjustable 1 V to 6 V output and maximum 0.6 A continuous output current. Operating across -40 °C to 125 °C junction temperature range and RoHS compliant, it only requires four external passive devices for a complete power supply circuit, eliminating tedious inductor selection and loop compensation work to accelerate development for industrial embedded systems with fluctuating high-voltage input rails.
The TPSM560R6RDAR serves as a compact auxiliary power solution for 24 V and 48 V bus powered industrial control boards, remote sensor I/O modules, factory automation equipment, smart building monitoring hardware, portable test and measurement instruments, and general embedded electronics with wide varying DC input voltage. Designers select this integrated buck module for high-voltage point-of-load conversion scenarios, where engineers need to generate stable low-voltage bias power for MCUs, analog frontends and communication transceivers, prioritizing simplified layout, small footprint, robust fault protection and short time-to-market rather than high output current capacity.
Alternative DC-DC step-down modules
● MPM3606-12 (Monolithic Power Systems): QFN-packaged wide-input integrated buck power module supporting 60V input range and 0.6A output current, equipped with full protection circuits for industrial auxiliary power conversion.
● LTM4607IV#PBF (Analog Devices): Compact surface-mount step-down power module with wide input tolerance, excellent thermal performance and flexible output configuration for industrial PoL power rails.
● PI3306-00 (Power Integrations): Highly integrated buck power module with built-in magnetics and comprehensive fault protection, suitable for space-limited high-voltage embedded power supply designs.
The TPSM560R6RDAR is a fully integrated synchronous step-down power module designed by Texas Instruments, shipped in tape-and-reel 15-pin Enhanced HotRod™ B3QFN package. This non-isolated point-of-load converter embeds power MOSFETs, shielded inductor and internal passive components, supporting 4.2 V to 60 V wide input voltage with transient withstand up to 66 V, adjustable 1 V to 6 V output and maximum 0.6 A continuous output current. Operating across -40 °C to 125 °C junction temperature range and RoHS compliant, it only requires four external passive devices for a complete power supply circuit, eliminating tedious inductor selection and loop compensation work to accelerate development for industrial embedded systems with fluctuating high-voltage input rails.
The TPSM560R6RDAR serves as a compact auxiliary power solution for 24 V and 48 V bus powered industrial control boards, remote sensor I/O modules, factory automation equipment, smart building monitoring hardware, portable test and measurement instruments, and general embedded electronics with wide varying DC input voltage. Designers select this integrated buck module for high-voltage point-of-load conversion scenarios, where engineers need to generate stable low-voltage bias power for MCUs, analog frontends and communication transceivers, prioritizing simplified layout, small footprint, robust fault protection and short time-to-market rather than high output current capacity.
Alternative DC-DC step-down modules
● MPM3606-12 (Monolithic Power Systems): QFN-packaged wide-input integrated buck power module supporting 60V input range and 0.6A output current, equipped with full protection circuits for industrial auxiliary power conversion.
● LTM4607IV#PBF (Analog Devices): Compact surface-mount step-down power module with wide input tolerance, excellent thermal performance and flexible output configuration for industrial PoL power rails.
● PI3306-00 (Power Integrations): Highly integrated buck power module with built-in magnetics and comprehensive fault protection, suitable for space-limited high-voltage embedded power supply designs.
