Model No: DRV8800PWPR
Texas Instruments DRV8800PWPR
Manufacturer: Texas Instruments
SEMICON NO.: DRV8800PWPR
Package: 16-HTSSOP
Stock: In stock
Description: Bipolar Motor Driver DMOS Parallel
SEMICON NO.: DRV8800PWPR
Package: 16-HTSSOP
Stock: In stock
Description: Bipolar Motor Driver DMOS Parallel
Quantity :
| Mfr | Texas Instruments |
| Device Type | DMOS Full-Bridge Motor Driver (Fully Integrated) |
| Motor Type | Brushed DC, Bipolar Stepper |
| Output Configuration | Half Bridge (2) |
| Number of H-Bridges | 1 |
| Control Interface | Parallel / Hardware (PH/EN) |
| Technology | DMOS |
| Supply Voltage (Vcc) | 8 V to 38 V |
| Output Current (RMS) | 2.8 A (Peak) |
| On-Resistance (HS+LS) | 740 mΩ (Typical) / 830 mΩ (Max) |
| Operating Temperature(TA) | -40°C to +85°C |
| Package | 16-HTSSOP |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
DRV8800PWPR 40V 2.8A Brushed DC Motor Driver
The DRV8800PWPR is a robust single full-H-bridge motor driver from Texas Instruments, engineered to drive brushed DC motors, one winding of a stepper motor, or solenoids in industrial and consumer motion control systems. Built with low RDS(on) N-channel power MOSFETs, it delivers up to 2.8A continuous output current and supports 8V–36V operating voltage, with a 40V absolute maximum rating for enhanced voltage headroom. Featuring a simple Phase/Enable control interface for easy MCU integration, it includes an internal charge pump for gate driving and supports 100% PWM duty cycle for smooth speed regulation.
Operating across a -40°C to 85°C industrial temperature range, the DRV8800PWPR offers ultra-low 10µA sleep current for power-sensitive applications, with comprehensive built-in protection: undervoltage lockout (UVLO), overcurrent protection (OCP), short-circuit protection, thermal warning, and thermal shutdown, plus a nFAULT pin for real-time fault indication. It features typical 830mΩ total on-resistance to minimize power loss, stable PWM switching up to high frequencies, and TTL/CMOS-compatible inputs for seamless connectivity with 3.3V/5V controllers.
AlternativeH-bridge motor drivers
1. TI DRV8801PWPR: Pin-compatible H-bridge driver with identical current/voltage ratings, featuring enhanced fault diagnostics for industrial use.
2. TI DRV8833PWPR: Dual H-bridge driver in 16-HTSSOP, lower-voltage alternative for small dual-motor portable applications.
3. onsmei LV8408VGEVB: 36V 3A H-bridge driver, cost-effective substitute with similar thermal performance for motor control.
4. STMicroelectronics L298N: Multi-purpose H-bridge driver, through-hole alternative for high-current legacy motion systems.
The DRV8800PWPR is a robust single full-H-bridge motor driver from Texas Instruments, engineered to drive brushed DC motors, one winding of a stepper motor, or solenoids in industrial and consumer motion control systems. Built with low RDS(on) N-channel power MOSFETs, it delivers up to 2.8A continuous output current and supports 8V–36V operating voltage, with a 40V absolute maximum rating for enhanced voltage headroom. Featuring a simple Phase/Enable control interface for easy MCU integration, it includes an internal charge pump for gate driving and supports 100% PWM duty cycle for smooth speed regulation.
Operating across a -40°C to 85°C industrial temperature range, the DRV8800PWPR offers ultra-low 10µA sleep current for power-sensitive applications, with comprehensive built-in protection: undervoltage lockout (UVLO), overcurrent protection (OCP), short-circuit protection, thermal warning, and thermal shutdown, plus a nFAULT pin for real-time fault indication. It features typical 830mΩ total on-resistance to minimize power loss, stable PWM switching up to high frequencies, and TTL/CMOS-compatible inputs for seamless connectivity with 3.3V/5V controllers.
AlternativeH-bridge motor drivers
1. TI DRV8801PWPR: Pin-compatible H-bridge driver with identical current/voltage ratings, featuring enhanced fault diagnostics for industrial use.
2. TI DRV8833PWPR: Dual H-bridge driver in 16-HTSSOP, lower-voltage alternative for small dual-motor portable applications.
3. onsmei LV8408VGEVB: 36V 3A H-bridge driver, cost-effective substitute with similar thermal performance for motor control.
4. STMicroelectronics L298N: Multi-purpose H-bridge driver, through-hole alternative for high-current legacy motion systems.
