Model No: 88E1510-A0-NNB2C000
Marvell Semiconductor Inc. 88E1510-A0-NNB2C000
Manufacturer: Marvell Semiconductor Inc.
SEMICON NO.: 88E1510-A0-NNB2C000
Package: 48-VFQFN
Stock: In stock
Description: Ethernet PHY Transceiver IEEE 802.3 Single 3.3V 72 mA
SEMICON NO.: 88E1510-A0-NNB2C000
Package: 48-VFQFN
Stock: In stock
Description: Ethernet PHY Transceiver IEEE 802.3 Single 3.3V 72 mA
Quantity :
| Mfr | Marvell Semiconductor Inc. |
| Product Family | Alaska® |
| Device Type | Single-Port Gigabit Ethernet PHY Transceiver |
| Standards Support | IEEE 802.3 (10BASE-T, 100BASE-TX, 1000BASE-T) |
| Data Rate | 10 Mbps, 100 Mbps, 1 Gbps |
| Duplex Mode | Full, Half |
| Number of Drivers/Receivers | 4/4 |
| Number of Channels / Ports | 1 |
| MAC Interface | RGMII, SGMII, MII |
| Integrated Switching Regulator | Single 3.3V supply operation |
| Supply Voltage (VDDIO) | 2.5V / 3.3V LVCMOS I/O |
| Core Supply | Single 3.3V |
| Supply Current (Max) | 72 mA |
| Operating Temperature | 0°C to +70°C |
| Package | 48-VFQFN |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
88E1510-A0-NNB2C000 Ethernet PHY Transceiver
The 88E1510-A0-NNB2C000 is a Marvell Alaska single-port 10/100/1000 Gigabit Ethernet transceiver housed in a 48-QFN exposed-pad package. It operates commercially from 0°C to 70°C, draws its core power from a single 3.3 V rail, and supports 2.5 V/3.3 V LVCMOS I/O standards, implementing the physical-layer portion of the 1000BASE-T, 100BASE-TX, and 10BASE-T Ethernet standards. The components is classified as a full/half-duplex 4/4 transceiver compliant with IEEE 802.3 and IEEE 1588, delivers data rates of 10 Mbps, 100 Mbps, and 1 Gbps, and is RoHS3-compliant with MSL3 rating, making it a mature, widely deployed physical-layer engine for connecting a MAC or switch ASIC to copper media through magnetics and an RJ-45 connector.
Typical application scenarios for the 88E1510-A0-NNB2C000 span enterprise, embedded, consumer, and metro/service-provider market segments where a single 10/100/1000BASE-T copper port must connect to a host processor or switch fabric via RGMII. It is widely deployed in network interface cards, routers, switches, servers, wireless backhaul equipment, IoT gateways, general-purpose embedded controllers, and industrial automation nodes that leverage SyncE and IEEE 1588v2 for time-aware networking.
AlternativeEthernet PHY Components
1. 88E1518-A0-NNB2C000: Marvell Alaska single-port gigabit Ethernet PHY in the same 48-pin QFN package with RGMII to Copper support, differing primarily in its 1.8 V-only LVCMOS I/O standard for lower-voltage host interfaces.
2. 88E1512-A0-NNP2C000: Marvell's 56-pin QFN sibling that adds SGMII to Copper, RGMII to Fiber/SGMII, and Copper to Fiber with auto-media detect, making it the right choice when fiber or SGMII connectivity is required alongside RGMII.
3. YT8531SC: Motorcomm cross-vendor Gigabit Ethernet PHY offered as a pin-to-pin compatible alternative to the 88E1510/88E1518 with equivalent RGMII-to-Copper functionality for localization or second-source strategies.
4. DP83867: Texas Instruments industrial-grade Gigabit Ethernet PHY with RGMII and SGMII interfaces, recognized as a functionally comparable alternative when a broader industrial-component ecosystem or TI supply chain is preferred.
The 88E1510-A0-NNB2C000 is a Marvell Alaska single-port 10/100/1000 Gigabit Ethernet transceiver housed in a 48-QFN exposed-pad package. It operates commercially from 0°C to 70°C, draws its core power from a single 3.3 V rail, and supports 2.5 V/3.3 V LVCMOS I/O standards, implementing the physical-layer portion of the 1000BASE-T, 100BASE-TX, and 10BASE-T Ethernet standards. The components is classified as a full/half-duplex 4/4 transceiver compliant with IEEE 802.3 and IEEE 1588, delivers data rates of 10 Mbps, 100 Mbps, and 1 Gbps, and is RoHS3-compliant with MSL3 rating, making it a mature, widely deployed physical-layer engine for connecting a MAC or switch ASIC to copper media through magnetics and an RJ-45 connector.
Typical application scenarios for the 88E1510-A0-NNB2C000 span enterprise, embedded, consumer, and metro/service-provider market segments where a single 10/100/1000BASE-T copper port must connect to a host processor or switch fabric via RGMII. It is widely deployed in network interface cards, routers, switches, servers, wireless backhaul equipment, IoT gateways, general-purpose embedded controllers, and industrial automation nodes that leverage SyncE and IEEE 1588v2 for time-aware networking.
AlternativeEthernet PHY Components
1. 88E1518-A0-NNB2C000: Marvell Alaska single-port gigabit Ethernet PHY in the same 48-pin QFN package with RGMII to Copper support, differing primarily in its 1.8 V-only LVCMOS I/O standard for lower-voltage host interfaces.
2. 88E1512-A0-NNP2C000: Marvell's 56-pin QFN sibling that adds SGMII to Copper, RGMII to Fiber/SGMII, and Copper to Fiber with auto-media detect, making it the right choice when fiber or SGMII connectivity is required alongside RGMII.
3. YT8531SC: Motorcomm cross-vendor Gigabit Ethernet PHY offered as a pin-to-pin compatible alternative to the 88E1510/88E1518 with equivalent RGMII-to-Copper functionality for localization or second-source strategies.
4. DP83867: Texas Instruments industrial-grade Gigabit Ethernet PHY with RGMII and SGMII interfaces, recognized as a functionally comparable alternative when a broader industrial-component ecosystem or TI supply chain is preferred.
