Model No: IS25LP080D-JBLE
ISSI IS25LP080D-JBLE
Manufacturer: ISSI
SEMICON NO.: IS25LP080D-JBLE
Package: 8-SOIC
Stock: In stock
Description: NOR Flash Memory IC 8Mbit 133 MHz
SEMICON NO.: IS25LP080D-JBLE
Package: 8-SOIC
Stock: In stock
Description: NOR Flash Memory IC 8Mbit 133 MHz
Quantity :
| Mfr | ISSI |
| Device Type | Serial NOR Flash Memory |
| Memory Size / Density | 8 Mbit (1 MByte) |
| Memory Organization | 1M x 8 |
| Architecture | Uniform Sector |
| Memory Interface | SPI - Quad I/O, QPI, DTR |
| Max Clock Frequency | 133 MHz |
| Max Data Transfer Rate | 532 Mbps |
| Supply Voltage (Vcc) | 2.3 V to 3.6 V |
| Supply Voltage (Nominal) | 3.0 V |
| Active Read Current (Max) | 25 mA |
| Operating Temperature | -40°C to +105°C |
| Package | 8-SOIC |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
ISSI IS25LP080D-JBLE NOR Flash Memory IC
The IS25LP080D-JBLE is a high-performance 8-Megabit (8-Mb) serial NOR Flash memory device from ISSI, engineered to deliver reliable non-volatile storage with exceptional read throughput for code shadowing, data logging, and firmware storage applications. This device is organized as 1,048,576 words of 8 bits each (1M × 8) and operates over a wide supply voltage range of 2.3 V to 3.6 V, with a nominal 3.0 V rating. Packaged in the industry-standard 8-lead SOIC (Small Outline Integrated Circuit) footprint, the IS25LP080D-JBLE offers a versatile and space-efficient memory solution for a broad spectrum of embedded systems, from consumer electronics to industrial control platforms.
The device supports a comprehensive suite of serial interface protocols, including Standard SPI, Dual SPI, Quad SPI, QPI (Quad Peripheral Interface), and DTR (Double Transfer Rate) modes, delivering exceptional flexibility in bus width and data throughput. With a maximum clock frequency of 133 MHz, the IS25LP080D-JBLE enables high-speed read operations that significantly reduce system boot times and improve overall application responsiveness. The memory array is organized into 4 KB sectors, 32 KB blocks, and 64 KB blocks, providing granular erase options that allow efficient memory management for various use cases. Standard SPI instructions are communicated via the unidirectional SI (Serial Input) pin, while Quad SPI and QPI modes leverage multiple I/O pins for enhanced data transfer rates.
Alternative serial NOR Flash Solutions
● IS25LP080D-JNLE – A functionally equivalent 8-Mbit serial NOR Flash from ISSI with identical 133 MHz Quad SPI interface and 8-pin SOIC package, offered with a different operating temperature range
● IS25LQ080B-JNLE – A drop-in replacement from ISSI that maintains the same 8-Mbit density, SPI interface, and 8-pin SOIC footprint with consistent electrical characteristics
● IS25WP080D-JBLE – An ultra-low-power variant of the 8-Mbit serial Flash family from ISSI, optimized for reduced power consumption while maintaining the same 133 MHz performance and package compatibility
● W25Q80DVSNIG – A widely adopted 8-Mbit serial Flash from Winbond with 104 MHz Quad SPI support and pin-compatible 8-pin SOIC package, serving as a cost-effective industry-standard alternative
The IS25LP080D-JBLE is a high-performance 8-Megabit (8-Mb) serial NOR Flash memory device from ISSI, engineered to deliver reliable non-volatile storage with exceptional read throughput for code shadowing, data logging, and firmware storage applications. This device is organized as 1,048,576 words of 8 bits each (1M × 8) and operates over a wide supply voltage range of 2.3 V to 3.6 V, with a nominal 3.0 V rating. Packaged in the industry-standard 8-lead SOIC (Small Outline Integrated Circuit) footprint, the IS25LP080D-JBLE offers a versatile and space-efficient memory solution for a broad spectrum of embedded systems, from consumer electronics to industrial control platforms.
The device supports a comprehensive suite of serial interface protocols, including Standard SPI, Dual SPI, Quad SPI, QPI (Quad Peripheral Interface), and DTR (Double Transfer Rate) modes, delivering exceptional flexibility in bus width and data throughput. With a maximum clock frequency of 133 MHz, the IS25LP080D-JBLE enables high-speed read operations that significantly reduce system boot times and improve overall application responsiveness. The memory array is organized into 4 KB sectors, 32 KB blocks, and 64 KB blocks, providing granular erase options that allow efficient memory management for various use cases. Standard SPI instructions are communicated via the unidirectional SI (Serial Input) pin, while Quad SPI and QPI modes leverage multiple I/O pins for enhanced data transfer rates.
Alternative serial NOR Flash Solutions
● IS25LP080D-JNLE – A functionally equivalent 8-Mbit serial NOR Flash from ISSI with identical 133 MHz Quad SPI interface and 8-pin SOIC package, offered with a different operating temperature range
● IS25LQ080B-JNLE – A drop-in replacement from ISSI that maintains the same 8-Mbit density, SPI interface, and 8-pin SOIC footprint with consistent electrical characteristics
● IS25WP080D-JBLE – An ultra-low-power variant of the 8-Mbit serial Flash family from ISSI, optimized for reduced power consumption while maintaining the same 133 MHz performance and package compatibility
● W25Q80DVSNIG – A widely adopted 8-Mbit serial Flash from Winbond with 104 MHz Quad SPI support and pin-compatible 8-pin SOIC package, serving as a cost-effective industry-standard alternative
