Model No: LT1395CS6#TRPBF
Analog Devices Inc. LT1395CS6#TRPBF
Manufacturer: Analog Devices Inc.
SEMICON NO.: LT1395CS6#TRPBF
Package: TSOT-23-6
Stock: In stock
Description: IC Current Feedback Amplifier 1 Circuit
SEMICON NO.: LT1395CS6#TRPBF
Package: TSOT-23-6
Stock: In stock
Description: IC Current Feedback Amplifier 1 Circuit
Quantity :
| Mfr | Analog Devices Inc. |
| Device Type | Single High-Speed Current Feedback Amplifier |
| Number of Channels | 1 (Single) |
| Architecture | Current Feedback |
| -3dB Bandwidth | 400 MHz |
| Slew Rate (SR) | 800 V/µs |
| Output Current (Max) | 80 mA |
| Input Offset Voltage | 1 mV (Typ) / 10 mV (Max) |
| Input Bias Current | 10 µA (Typ) |
| CMRR | 42 dB (Min) / 52 dB (Typ) |
| Supply Voltage (Vs) | ±2 V to ±6 V (Dual) |
| Quiescent Current (Iq) | 4.6 mA |
| Operating Temperature | 0°C to +70°C |
| Package | TSOT-23-6 |
| Mounting Type | Surface Mount |
| Compliance | RoHS Compliant |
LT1395CS6#TRPBF ADI High Speed Rail-to-Rail Op Amp
LT1395CS6#TRPBF is a single-channel high-speed rail-to-rail input and output operational amplifier from Analog Devices (Linear Technology), packed in compact SOT-23-6 surface-mount housing shipped via tape-and-reel format with full RoHS compliance and MSL1 rating for automated high-volume SMT assembly. This wide supply range amplifier works on single 2.7V to 12V or dual ±1.35V to ±6V power rails, rated for commercial operating temperature from 0°C to +70°C, built for fast signal conditioning with 120MHz unity-gain bandwidth and 220V/µs rapid slew rate. It features full rail-to-rail input stage without crossover distortion and output swing approaching supply rails, eliminating wasted dynamic range in low-voltage battery-powered circuits, with low quiescent current of just 7mA per amplifier to balance speed and power consumption for portable high-frequency analog systems.
Current Feedback Amplifier Features
This high-performance op amp delivers excellent DC precision with 0.5mV maximum input offset voltage and low input bias current under 1µA, paired with ultra-low total harmonic distortion for clean sine wave amplification and buffer applications. The device is unity-gain stable for simple follower circuits, includes internal ESD protection on all signal pins to resist assembly and field voltage surges, and maintains stable performance across full supply voltage and temperature ranges. Rail-to-rail input capability accepts signals spanning the entire supply window without clipping, while the output stage drives low-impedance loads effectively without excessive voltage drop. It supports high-speed data conversion buffer, pulse amplification and fast loop feedback circuits, and its tiny SOT-23 footprint minimizes PCB space for dense multi-channel analog board layouts in handheld and compact industrial hardware.
Alternative high speed op amps
● LT1395IS6#TRPBF (ADI): Pin identical industrial grade SOT-23-6 variant supporting -40°C to +85°C temperature range for harsh environment direct drop-in replacement.
● OPA847IDBVR (TI): Ultra-wideband high-speed op amp in SOT-23-6 package with comparable bandwidth for high-frequency measurement second-source substitution.
● AD8065ARTZ (Analog Devices): Low noise high speed rail-to-rail amplifier optimized for precision sensor signal amplification in compact portable devices.
LT1395CS6#TRPBF is a single-channel high-speed rail-to-rail input and output operational amplifier from Analog Devices (Linear Technology), packed in compact SOT-23-6 surface-mount housing shipped via tape-and-reel format with full RoHS compliance and MSL1 rating for automated high-volume SMT assembly. This wide supply range amplifier works on single 2.7V to 12V or dual ±1.35V to ±6V power rails, rated for commercial operating temperature from 0°C to +70°C, built for fast signal conditioning with 120MHz unity-gain bandwidth and 220V/µs rapid slew rate. It features full rail-to-rail input stage without crossover distortion and output swing approaching supply rails, eliminating wasted dynamic range in low-voltage battery-powered circuits, with low quiescent current of just 7mA per amplifier to balance speed and power consumption for portable high-frequency analog systems.
Current Feedback Amplifier Features
This high-performance op amp delivers excellent DC precision with 0.5mV maximum input offset voltage and low input bias current under 1µA, paired with ultra-low total harmonic distortion for clean sine wave amplification and buffer applications. The device is unity-gain stable for simple follower circuits, includes internal ESD protection on all signal pins to resist assembly and field voltage surges, and maintains stable performance across full supply voltage and temperature ranges. Rail-to-rail input capability accepts signals spanning the entire supply window without clipping, while the output stage drives low-impedance loads effectively without excessive voltage drop. It supports high-speed data conversion buffer, pulse amplification and fast loop feedback circuits, and its tiny SOT-23 footprint minimizes PCB space for dense multi-channel analog board layouts in handheld and compact industrial hardware.
Alternative high speed op amps
● LT1395IS6#TRPBF (ADI): Pin identical industrial grade SOT-23-6 variant supporting -40°C to +85°C temperature range for harsh environment direct drop-in replacement.
● OPA847IDBVR (TI): Ultra-wideband high-speed op amp in SOT-23-6 package with comparable bandwidth for high-frequency measurement second-source substitution.
● AD8065ARTZ (Analog Devices): Low noise high speed rail-to-rail amplifier optimized for precision sensor signal amplification in compact portable devices.
